Note: Make sure the power is off when you cut the strip lights and you need to buy some connectors to connect the Strip after cutting it. Remember, do not cut the light strip randomly to avoid damage. How to Install Ksipze Led Light Strip on TV Step 3: If there’s a reset button on the remote control or the Light Strip, press the reset button to reset the Light Strip. Final Words

Make sure that you have the latest version of the HappyLighting app installed and that your device’s Bluetooth is turned on and functioning properly. If the app is not working correctly, try uninstalling and reinstalling it. If you’re having issues connecting your Ksipze Led Light Strip to Bluetooth, try the troubleshooting tips below to fix the problem:

The cut points are usually located every few inches or so, depending on the model of the LED light strip that you have. How to Cut Ksipze Led Light Strip Once you have cut the strip to the desired length, you may need to add connectors or solder wires to the cut ends to reconnect them to the power supply or other parts of the LED lights strip. A software issue with the app or Bluetooth connection itself may also be responsible for your device not connecting to Bluetooth.

To cut Ksipze LED lights, locate the nearest marked point on the Led Light Strip then, using a pair of sharp scissors cut along the marked line carefully, making sure not to cut through only the marked points. Step 2: Cut the Ksipze LED light strip to the desired length using sharp scissors or a sharp knife, making sure to cut along the designated cut marks. Interference from other devices can cause connectivity issues with your Ksipze LED light strip. Try turning off other Bluetooth devices in the area or moving the light strip to a different location to remove all interference.Turn off or disconnect other devices that may already be connected to your Bluetooth connection. Bluetooth unlike Wi-Fi has a limited number of devices that can connect to it which is usually one. Step 4: Insert the Ksipze LED light strip into the magnetic clips, pressing down firmly to ensure a secure hold.