If you need advice on your faulty product please feel free to ask, we will be more than happy to advise you. Parts all carry a 28 day return to us guarantee, we will do all we can to help if the part does not cure your fault. TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to enable component audio. The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. This TV receiver is supplied with a moulded mains plug. The mains plug must not be cut off, as it may contain a special radio interference filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer.

either the ASA or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the You can use Power Save Mode setting, located in the Other Settings menu. If you set Power Save Mode as Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency rangeDO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to After being patient for nearly 3 weeks I got onto head office (complaints dept really) @*rgos, then got approval by phone to go and get a new one ( I must have passed its engineer exam/customer hasn't twiddled with it exam ).

This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (various external devices). This device is only suitable for the operation in dry interiors. candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.hours continuously, it may result in the outline of the images that were displayed for too long to remaining visible on the screen, i.e. permanent ‘afterimages’ remain on the screen. Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment. The LCD panel is a very high technology product with about a million thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed blue, green or red point. Please note that this does not affect the performance of your product. DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure that your family know how to do this.