The level of humidity for the bathroom can be chosen from between 60 and 90% RH. The extract fan will continue to work long enough to reach the selected level. Conventional extractor fans are not ‘fashion friendly’ and for a number of people this is not a problem. However, the consumer who has just spent a small fortune on a fabulous bathroom with a trendy walk-in shower will require something extra special that is pleasing on the eye. EnviroVent have the perfect solution – the stylish SILENT 100 Design. The Silent 100 fan features an adjustable run-on timer. In automatic mode, the over-run timer calculates the amount of time to operate, depending on how long the fan has been running for. Finally, if you think you (or anyone else in the house) will forget to turn the fan on, consider a model with a humidity sensor. This automatically activates the fan when the level of moisture in the air exceeds a certain threshold. This sensor may need occasional cleaning, though, or the accumulation of dust or grime will hinder its effectiveness. What about noise?

New SILENT 100 Design Extractor Fan | EnviroVent The New SILENT 100 Design Extractor Fan | EnviroVent

The new ‘design’ fans join the wider and established SILENT Range of ventilation products that incorporate the same patented silent technology. Developed with the same precision in quality and performance The SILENT Range offers a wider choice of applications for kitchens, bathrooms, small rooms and solutions for ducted systems where it is necessary to either ventilate a room or to exchange heat between adjoining rooms.

Blow off some steam, banish damp and wave goodbye to condensation with our favourite bathroom extractor fans for every budget

The SILENT 100 Design is a new range of domestic axial fans suitable for utility rooms and bathrooms available in two colours, white or silver, complete with four smart interchangeable front panel trims in four evocative shades. By incorporating whisper-quiet silent technology, the presence of the SILENT 100 Design fan promises never to ruin the ambiance of the room it has been installed in. Innovative Silence The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations. Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off.

VENTS 100-SILENTA 100 Silent A Bathroom Extractor Fan Energy

lt;p>The Silent 100 is a 100mm domestic axial powerful bathroom extractor fan for wall or ceiling installations, designed to solve ventilation problems in WC’s and bathrooms. Interior designs have influenced the way we choose items for the home from wallpaper to practical electrical appliances. From cooker hoods to shower curtains, current trends have an effect on what we buy and even in a recession consumers still want to furnish and enhance their homes. For the style conscious certain appliances, such as extractor fans, still provide a challenge. The SILENT MV 160/100 is a domestic, axial in-line fan, designed for ducted systems. Incorporating the same patented silent technology, the low profile design of the in-line model provides the most effective solution for installers in areas where space is restricted, such as false ceilings. The SILENT in-line fan can be connected to any point on the ventilation duct, without loss of performance. Here, a benchmark study was carried out on the market’s most popular domestic axial extract fans to test their acoustic benefits against the patented ‘silent’ technology of the SILENT Range. Each appliance went through sound power level testing using sound pressure. At the time of testing the results showed that out of all the axial fans tested, the most popular ‘quietest’ model on the market emitted twice the noise level of the equivalent SILENT model. Designed to be aesthetically pleasing the SILENT 100 Design has been developed without compromising on performance or quality. Vent-Axia has really pushed the boat out with this brand-new model. Aside from shifting up to 39l of damp air per second, this bathroom extractor comes crammed with more sensor tech than any other model on the market. In fact, it has a sensor for everything, even odour. Yes, that’s right, when this clever little air mover detects a nasty smell, it either switches itself on or, if already running, speeds up the fan, returning the bathroom to its original sweet-smelling scent in a thrice.In a survey carried out by ventilation specialist Vent-Axia, 40% of respondents said that they or their children had been woken in the night by a noisy bathroom fan. Even the cheapest fans are usually very quiet out of the box, but as the motor bearings start to wear – typically after about two years with low-end models – the blades can start to oscillate against the main housing, producing an annoying rattle in the process. A higher-quality fan should last longer, but if you value quietness then at some point you’ll probably need to repair or replace your fan. How do you install a bathroom extractor fan? This really is an excellent extractor that uses just 2W of electricity when running continuously and no more than 5W at full pelt. It’s also one of the most attractive models around – the fascia can be used bare or with the included white magnetic cover – and one of the very quietest. CHZ models have an adjustable humidistat, Visual models have an LED display and button to change the sensitivity from the front panel. For smaller restricted spaces, the SILENTTUB 100 offers the perfect solution, without any compromise on performance. Each application of the SILENT in-line range is IP44 rated. 5 Year Guarantee

Envirovent Silent 100 Axial Extract Fan - Extractor Fan World Envirovent Silent 100 Axial Extract Fan - Extractor Fan World

The SILENT DUAL is anintelligent extractor fan for bathrooms and WCs. It automatically adjusts its performance according to the environment and ventilation requirements via two sensors: a presence detector and a humidity sensor. New Intelligent timer version, fan switch on is delayed until after the light is switched on for a minute to avoid unnecessary noise at night if only in the bathroom for a short time. Incorporating an intelligent algorithm to automatically adjust its settings according to the environmental conditions, it does not require the need for user interaction. The motor is commissioned to achieve the required flow rate, minimising the electricity consumption and noise levels to meet the exact ventilation requirement. Extractor fans are a necessary part of modern day life. As we construct or refurbish our homes in-line with stringent building regulations to become more energy efficient by adding measures such as cavity wall insulation, loft insulation and double glazing, we effectively‘seal –up’ our homes and by doing so create poor ventilation, which can lead to condensation and mould problems. If you don’t already have a fan, you’ll need to get in a qualified builder to make the hole and install the wiring. Be aware that there are regulations governing where your fan can be located: if you want to put a fan in Zone 1 (the area within a shower or 2.25m above a bath) or Zone 2 (60cm from Zone 1), it must be a low-voltage SELV fan with a transformer, or an AC-powered model that’s IPX5-certified. Most of our recommendations below are intended for use outside of Zone 2, but the layout of your bathroom may dictate your options.

The SILENT Range

The SILENT 100 Design has innovative optional features including an adjustable humidity sensor which allows the humidity level in the bathroom to be chosen from between 60 and 90% RH. Another optional feature is the adjustable timer which allows the shut off time to be delayed between 1 and 30 minutes after disconnection. The SILENT Range The precise duration of the overrun is normally configured during installation, with most fans offering a range between 30 seconds and 30 minutes. You might as well tend towards the latter end of the scale as the cost is very low: on average, a fan like this uses around 8W.