IKOpro SA Bitumen Primer is a rubber-modified bituminous priming solution designed to seal and prepare surfaces for the application of self-adhesive roofing and waterproofing systems. A layer of primer on the surface facilitates roof waterproofing work. Self-adhesive and weld-on coatings are better glued to the processed plane. Structure The primer contains no toxic substances Bituminous primer is different from mastic properties, purpose of application and composition... Materials are intended for different jobs. The primer holds the top layer of the base together, protects against moisture, deterioration, and ensures effective adhesion. The mastic is used as a waterproofing layer and an adhesive layer for laying reinforcing mesh and finishing roofing. All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt. If necessary, remove any organic growth i.e. moss or lichen, with a fungicidal wash. On bare metal a rust inhibiting product, such as red oxide or zinc phosphate should be applied and allowed to harden. Bituminous the primer without polymer and emulsion additives contains only resin and organic thinners. It is suitable for all types of roofing and other works.

Bitumen Primer - A highly penetrative, bituminous priming Bitumen Primer - A highly penetrative, bituminous priming

If the construction or finishing conditions do not require the use of a highly specialized composition, a universal version of a bituminous liquid is used. The primer is ideal for low pitched roofs, road construction and underground applications. All surfaces must be free from oil, dirt, dust and loose debris. On metal surfaces all loose rust should be removed with a wire brush and any advanced signs of corrosion should be treated with a rust inhibitor. Surfaces should be dry before application although Bitumen Primer will adhere to damp surfaces The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. mastics are distinguished by higher viscosity, fillers in the form of chalk, mineral chips, and other particles are included in the composition;

Packing of bitumen primer D 41

Bitumen Primer is a low viscosity bituminous primer for use on porous surfaces before remedial roof treatment, including pour and roll and torch-on felt applications. Approximately 3-­6 hours depending on drying conditions. May be extended for heavy coatings or in cold weather. Indicator depends on the type of impregnation and the porosity of the treated surface... Manufacturers indicate consumption data on the label.

Page 1/7 Safety data sheet - IKO Group

The first method is to soak a brush or roller in a solution and roll it out on a plane. Otherwise, the solution is poured from the container onto the surface in small portions at some distance. After that, the tool is leveled with a tool until the entire area is completely covered. Cromar Bitumen Primer is a bituminous solution designed to prime and seal porous roof surfaces, promoting adhesion for waterproofing systemsIf the pollution happened recently and the soil has not frozen, you can do without chemistry. It is necessary to remove the substance with a scraper, then rinse with soapy water. You can use a thinner white spirit, gasoline. When processing a roof made of reinforced concrete slabs, the surface of the elements is treated and the butt joints between the panels are impregnated. The subsequent layer of mastic is also placed in the seams, therefore, using a primer, they provide adhesion of materials in a hard-to-reach place. Road On metal surfaces, special store-bought products are used to remove bitumen. The drugs are sold in bottles or in the form of sprays, they do not leave marks. Bitumen primer manufacturers