The Avantree Orbit is only a transmitter with no receiver mode, but we decided to test it because of its unique LCD display. You can read more about this problem in our article “ Bluetooth Headphones Don’t Always Play Nice with Computers.

This product can receive one Bluetooth signal and transmit three Bluetooth signals, allowing three persons sharing music at the same time.Bluetooth can only do up to Two Bluetooth headphones at the same time, so we recommend going with our 2. Thanks to the completely wireless connectivity, it doesnt matter whether you have a headphone jack or not. Adjust volume from the device's lock screen, Control Center, or with the volume buttons on the side. An easy connection and reliable Bluetooth signal: For our tests, we used an iPhone XR and a MacBook Pro as our Bluetooth sources. This brand is the cheapest bt splitter that i could find and i had no issues with it for the 6mnths that i was using it.

We measured the audio latency by sending signals to two different Bluetooth receivers: the Sony HWS-BTA2W, which supports only the laggier SBC codec, and the Aluratek ABC53F, which supports the aptX and aptX Low Latency codecs. but you'll have to use the Bluetooth headphones in wired mode or use wired headphones for this case. Which is where we come in, we’re going to help you narrow down your choice from the 5 products in the MP3 accessories and the 27 available from KitSound for you to choose if KitSound Bluetooth Headphone Splitter is the right product for you.Its stance of putting consumers first is protected and enshrined in the legally-binding MSE Editorial Code. Sound level: To make sure these transmitters didn’t reduce the sound output level, we measured the output of the Audioengine B1 sending a 250 mV, 1 kHz signal into each transmitter, with the transmitters’ volume controls (where available) set to maximum.