Optimize the interface layout and operation interaction when loading the receiving card configuration file; Supported multimedia players TB1/TB2/TB3/TB4/TB6/TB8/TB30/TB40/TB50/TB60/JT100/JT50/TCC70/JT200/JT20 Fix the problem that the display cannot be turned on because the Gamma data is not sent when the HX8055 chip sends parameters; In the full grayscale calibration, when manually uploading the calibration coefficient, it supports uploading according to the specified area;

The network is not good during online correction, and the occasional software crash problem is fixed. The visual refresh rate of ICND2053/2153 exceeds 30720, and the problem of failure to adjust the brightness is fixed.

Green energy-saving and environmental protection: low voltage, low power consumption, low radiation. When manually uploading the correction coefficient, the correction area is too large and the memory overflow problem is fixed;

HD/NovaPro HD/NovaPro UHD Jr/VX2/VX2U/K2U/VX4/VX4S/VX4U/K4/K4S/K4U/VX5s/V700/V800/V900S/VX16s/V1260/V1160/V1060/V960/V900/V760/ VX1000/K6s/K4S-N/VX2S/VX6S/VX400S/VS1/VS2/VS3/VS7/VS8/H series/C1/C3/D12/N9/N6 million pixel loading capacity, with resolutions of 1280×1024@60Hz, 1024×1200@60Hz, 1600×848@60Hz, 1920×712@69Hz, 2048×668@60Hz and Maximum height: 3840; Maximum height:3840 When the combination screen is configured, the correction switch is also supported when the logical index of the display screen does not match the physical index; In the process of point-by-point calibration database upload, a prompt is added when the selected area is larger than the active area of ​​the database.

When the newly added screen boss/screen doctor is bound, the relevant monitoring parameters will be automatically configured. Optimize the problem of slow DVI screen display point by point, and optimize the speed to 20 times of the original; The online calibration coefficient can be "cancelled" on the calibration software during the stable upload process; Fixed the sporadic blurred screen problem after sending the configuration file to the T series sending card; Complete the reconstruction of LS9926, LS9929, LS9928, LS9919, LS9920, LS9917, LS9961 video core chips;