Question: May I know how and if I configure kernel drivers for the Touchscreen, will it avoid conflicting with the camera and solve my problem?

From OKdo, the freestanding Pi 4 screen case is designed to house your Raspberry Pi 7 LCD touch screen along with your Raspberry Pi 4 board neatly behind it. This versatile case is suitable for use with the Raspberry Pi 4. The enclosure consists of the main RPi LCD touch screen and board casing with a removable rear cover which simply snaps together.videobuf2_common 81920 9 bcm2835_codec,videobuf2_vmalloc,videobuf2_dma_contig,videobuf2_v4l2,bcm2835_unicam,bcm2835_v4l2,v4l2_mem2mem,videobuf2_memops,bcm2835_isp Next on our list is a monitor by Kuman, one of the top manufacturers in hobby electronics. The monitor is a 7-inch large TFT capacitive touch screen. It supports a 1024×600 screen resolution and a capacitive control with 4:3 and 16:0 display conversion. SunFounder Raspberry Pi 10 Inch Touchscreen features an IPS LCD panel capable of a resolution of 1280 x 800, a speaker, wide 178-degrees viewing angle, fast response times, good color accuracy as well as picture quality. The SunFounder Raspberry Pi 10 Inch Touchscreen allows you to power your Raspberry Pi directly from the touch screen, a convenient solution for portable projects. similarly to the user above, I am in a similar conflict and any tutorial I use is mildly outdated by a few years.

There are some other competitors 3rd party touchscreens out there, but if you’re after the official screen that is guaranteed to work on the latest Raspberry Pi’s, then this is the one to get.I hope I touch on as many points as possible in this guide. If you feel that I have missed something, then please don’t hesitate to leave a comment. Video If you’ve taken the plunge to see what all the fuss is about and secured a Raspberry Pi kit, you’ll likely be looking to source the last piece of the puzzle: a screen, and more than likely, one of the touch variety.

You need to look for a screen’s compatibility standards with the various systems you may use besides the Raspberry Pi. Code: Select all [img]https://l4qzlq.dm2304.livefilestore.com/y3pGL3DEux6jHPPmUnOP8I9z855o7VOwPtzIE_gf6OCB5u4xI5NfhjPLJSkwzotn2yak7yGUhi_r7--yU-iWTHJg-IFUUN0KV7ZKrS1C6hdqOgQ5InR5mJ8Q7yhZUWXh2g0u3UHTZBDiVW7MXhv2BM_y-a8GZ8IKy9DeeKZXAesbFk/IMG_20151129_144331541.jpg[/img] Attached are some photos. You can see how the 210mm diagonal piece is as big as my delta printer can print. The screen comes with a touchpad, flash print, and an SD card slot. These are features that should be verified upon purchasing as they come along with the screen. You’d need to connect the micro HDMI and USB-C adapters to the Raspberry Pi 4, and the HDMI and micro USB adapters to the previous generation Raspberry Pi model B boards.

Conclusion

There is also a second set of threaded inserts to mount your own development board or another piece of hardware. Perfect for an industrial or commercial application where you want to add your own development board to the case.

The monitor is suitable for Raspberry Pi tinkerers who want to try their hand designing and 3D printing. Unfortunately, it has the aesthetics to match, rough around the edges with an exposed finish that may not suit those who prefer a more stylish look for their screen. Overall, excellent design. Everything lined up very well. I had to enlarge the rear screw holes a bit to get the screws in, but that is probably due to my ABS shrinkage. Took 2 seconds with a 1/8" bit, not a problem.

Features

quoted: libcamera uses kernel drivers for the camera control which will conflict with the touchscreen which defaults to being polled by the firmware. Since regular displays make effective communication between peripherals, we suggest you use connectors such as HDMI, VGA & AV-input. Below is a breakdown of the listed connectors HDMI- High Definition Multimedia Interface mc 73728 9 v4l2_async,videodev,bcm2835_codec,ov9281,videobuf2_v4l2,bcm2835_unicam,videobuf2_common,v4l2_mem2mem,bcm2835_isp The 3.5” inch screen with an HDMI display can showcase very high-quality pictures because of the adjustable resolution between (480×320) to (1920×1080) with a recommendation of 3:2. In this course, we recommend going with (720×480 and 810×540). To add on, the monitor only works when mounted directly on GPIO pins on the Raspberry Pi board.