Mavic 3 Cine is a version with Apple ProRes 422 HQ encoding for a maximum data rate of 3772Mbps, giving professional users a powerful tool to satisfy post-production needs in their daily business. [2] To handle the large amounts of data from the ProRes codec and high frame rate videos, Mavic 3 Cine comes with a built-in 1TB SSD. For a smoother export experience, the new DJI 10Gbps Lightspeed Data Cable helps transfer large data files rapidly. Effortless Flights With Enhanced Flight Safety

The battery level LEDs of the battery and remote controller blink in sequence to display the current battery level during charging. After fully charged, the four Battery Level LEDs emit a solid light. Along with a suite of new features and performance innovations, DJI introduces new ways to control, capture with, and carry DJI Mavic 3. After running the Mavic 3 Pro firmware with one set of batteries in the drone, insert the next set of batteries into the Mavic 3 Pro and run the firmware again when prompted. To avoid accidents, the DJI Fly app shows a message to warn us about any damaged cells in the LiPo battery.

You work at BID, what a legend.

Actual available storage space may be reduced due to system configuration. For more details, see the Mavic 3 specs. MORE: DJI Mavic 3 Pro Review (I have NEVER flown a drone that I enjoyed so much) General Information

That having been said, whenever it is safe to update your DJI Fly app, make sure that you also update your drone and the battery firmware. The app will prompt you to do so and you will need to turn on your drone again. However, when the app is in a stable build, it is the recommended way by the manufacturer to operate your equipment. Precautions to take when using Mavic 3 batteries Insert the battery to the aircraft, connect the USB-C charger or PD fast charger to the USB-C port of the aircraft, and the Battery Level LEDs in an array blink successively.

Intelligent Modes for Unlimited Possibilities

Measured in an outdoor, open environment, without interference, and with FCC compliance. The above data shows the farthest communication range for one-way, non-return flights. Please pay attention to RTH reminders in the DJI Fly app during your flight. The following table shows the different combinations of LED light displays that you will see when charging. Let us explain them briefly: Connect the battery to the charger, and the Battery Level LEDs in an array blink successively. The charging time for one battery is approximately 1 hour and 30 minutes. After fully charged, the four Battery Level LEDs are off. Detach the charger after charging is complete.

The larger image sensor gives Mavic 3 higher video resolution and dynamic range and more effectively suppresses noise in low-light environments. A native dynamic range of 12.8 stops helps retain more details in highlights and shadows, preserving rich visual information with a greater sense of depth and elevating imagery to a professional level. An adjustable aperture of f/2.8-f/11 is available to meet the needs of aerial photographers in a wide variety of lighting scenarios to get sharper and clearer images. If for some reason your battery(s) has been depleted beyond 15%, it is imperative to recharge the battery up to 60% as soon as possible.

DJI of course recommends using their branded chargers, however, we have used various 3rd party 65-watt and 100-watt chargers in the past with no issues. Over-Discharge protection prevents the battery from discharging in excess when in idle mode (this is not enabled when the battery is being used). Step 2: Plug the USB Type C cable or the DJI 65W portable charger into the rear of the drone, just above the battery.