One of the most useful features of the QEP cutter is a fixed extension table that allows you to keep your tiles in place while you’re cutting them. We also really liked the mitre and parallel guides – these made this a particularly easy cutter to cut straight lines with. The finish is extremely clean and it’s also easy to cut angles and bevels. Place the tile in the cutter, aligning the mark with the cutting guide, using the help of the rotating set square the ensure the tile doesn’t move.

The table and frame are made from steel to ensure maximum durability and it has rubber foot pads for better stability. Adjusting the fence is a bit tedious considering that both ends must be positioned and clamped for precision cutting.If you’re looking for a cost-effective electric tile cutter that’s capable of cutting large format tiles, then this is the right option for you. With an extra-large aluminium cutting table which tilts for 14-degree, 30-degree and 45-degree mitres, you can enjoy hassle-free tile cutting to suit your project. Features adjustable wheels and strong folding legs for easy repositioning and transportation. It also includes built-in handles for convenient carriage. We found that this cutter produced smoother cuts than any of the manual tile cutters. However, despite the claim that the water re-circulation system ensures a clean workstation, we found that the cutter did produce a fair amount of mess. We’d therefore recommend using it either outside or in an area that’s easy to sweep up.

Industry Connections: We maintain close ties with manufacturers and brands, offering insights into trends and upcoming products. Insert spacers between each tile to ensure consistent spacing, finishing off with levelling clips. Continue laying tiles, overlapping at the very top of the tiles at a 45-degree angle to create the herringbone tile layout. Ensure that you’re aligning the edges and corners as you go, making adjustments when you need to. Our specialists will come to the object, measure, take away and deliver the ready material in convenient for you time. We perform sawing of any complexity and volume, in particular we work with large-format boards. We are ready to cut ceramic and porcelain tiles for wall, floor, stairwells of private and commercial facilities. Electric tile cutters on the other hand require minimal physical effort and they can be used to achieve precise cuts on a range of tiles. However, they do have some negatives as they are more expensive, require a power source, can be noisy and achieving perfect straight cuts can be challenging as the diamond blade can cause chips to certain types of tile.

How to work with a hand tool

Modern capabilities and skill of specialists allow to cut tiles at 45 degrees, not only from the edge, but also in the middle of the product. To do this, the tiles need to be measured and cut in accordance with the required size, and then cut to 45 degrees. To get a high-quality result, you should close the cut edge with sandpaper. How to form an acute angle? The 7-inch blade spins at up to 2,800 rpm, and you can cut straight across tiles up to 17x17 with this tool, along with cutting tiles up to 12x12 on a diagonal, which makes it good for both wall and floor tiles. On straight cuts up to 12 inches, the saw delivers accuracy to within 1/16th of an inch. The saw cuts to a maximum depth of 1.25 inches, but note that this saw doesn't tilt for making miter or bevel cuts. It weighs 27 pounds. When a diagonal tile layout is selected for tiling. In this case, it is necessary to perform the cutting of the tile itself at an angle of 45 degrees.

Another important part to consider is the tile cutter’s bed. While it might seem like a simple, arbitrary part of the cutter, some specific features can help improve the usability of the manual tile cutter. Manual tile cutters are perfect, allowing you to make straight or diagonal cuts on both small and medium-sized tiles. Porcelain tile cuttersCut your tiles row by row to save you some time and ensuring that you’re making the right cuts and aren’t wasting materials. Always measure twice before you cut to avoid any mistakes. Installing the Herringbone Tile Pattern Electric tile cutting machine, laser, hydro-abrasive such options are not used in the home because of the high cost and complexity of implementation. Basic rules Measure the area where you plan to install the herringbone tile pattern. Multiply the length and width of the space to determine the square footage.