Find the oil filter (a small mirror can come in handy if you can’t safely get under your car) and place the oil pan underneath it. Attach the removal tool to the oil filter and remove it. Make sure to clean the mount with a rag. I didnt think it would be so difficult to find out the size of the oil filter cap, there must be someone on babybmw that has a series 1 and changes their oil. I wanted rather than a chain the cup type that works with a wrench, not even sure there is enough space to use a chain. Do others use chains on their 1 ers?

DEDC 86mm 16 Flutes Oil Filter Wrench for BMW, Oil Filter

Sunbright is the number one BMW oil filter removal tool manufacturer that is serving over a million client-customers worldwide.

Our oil filter wrench removal tools are cap-type filter wrenches that prevent damage to the filter housing of your BMW engine.

BMW Oil Filter Cap Removal/Install Tool Billet BMW Oil Filter Cap Removal/Install Tool

If you do not have large slip-joint pliers you may have the old stand-by... a screwdriver. and hammer. Puncture the old filter and lever it loose. Messy but effective. The Burger Motorsports billet oil filter wrench is the BEST BMW oil filter wrench out there. This quality tool is a must for any BMW owner and for the price you can't beat it.Only fits the N20, N26, N51, N52, N54, N55, N63, N74, S63, and S55 engines including the following models: The Halfords Advanced Adjustable Oil Filter Remover is suitable for use in restricted areas. It is designed to grip tighter as more force is applied and it is suitable for 65 to 120mm diameter. Features & Benefits: No problem with it fitting up in the recessed area? Mine's a 12, and don't know if the filter area is the same on all 1200's... tomp dd50

BMW Oil Change Service Tools | BimmerWorld BMW Oil Change Service Tools | BimmerWorld

Oil Filter Wrench - Multi Tool - 2005-later BMW 'R' Bikes, 2005-08 K1200 Series Bikes - by A&S BMW Motorcycles - - A&S BMW Motorcycle Parts and Accessories I recognize the fact that this thread contains the word "Oil" and is thus susceptible to discussion.

At O'Reilly/Kragen Auto Parts you should find a Pennzoil band-type filter wrench in three or four sizes. Looks like this . Use my fingers to open/close the oil filler cap without problems. Threads are not coarse. Fine threads let the cap seat slowly, just slightly compressing the rubber O ring below. Doesn't leak oil, hasn't come loose or blown out and lost. Too much torque can flat spot the O ring, reduce it's ability to seal, need to replace sooner. Dispose of your old oil at an appropriate location, some recycling centres will dispose of it for you. Registered office: Media House, Peterborough Business Park, Lynch Wood, Peterborough PE2 6EA and H Bauer Publishing, Company number: LP003328; Sunbright is one of the leading automotive supply manufacturers in the industry and has been producing quality BMW oil filter removal tools in the market for over 15 years.