This inconsistency makes the experience a bit confusing, but I guess you would get used to it after a while. 350W 24V Power Supply

Not the cleanest benchy out there, but decent results, even though the ringing effect can be seen on the bow.Bed Strain Relief: it is a support structure for the heated bed wires. It reduces the risk of damage while increasing printer safety. Whether you’re after a new extruder, hot end, tubing, nozzles, tensioners, knobs, casings, cooling systems, and so much more, there’s an option out there. For a deeper dive into what’s available, head to our dedicated Ender 3 upgrade guide and Ender 5 Pro upgrade guide. Ender 3 V2 vs Ender 5 Pro – The Bottom Line

If you’d rather side step a hands-on automatic bed leveling upgrade, there’s also the Ender 3 S1, Ender 3 Neo, and soon-to-be-released Ender 5 Neo printers, which all have Creality’s CR-Touch ABL probe installed as standard. However, the difference between 120 and 250 mm/s may not matter much, because the actual speed difference is tiny. On a Benchy the difference is only 3 minutes. This is because the machine needs to accelerate to the top speed, then slow down before turning a corner. Just like your car, it can’t reach top speeds instantaneously. Even if a print covers the entire bed it will rarely hit the maximum speed. Printing on the Creality Ender 5 S1 Some printers have issues when a lot of retractions need to be done and The Jungle Queen model is an excellent stress test for this. It has a lot of tiny features that need good extrusion quality to be printed well, large overhangs, and bridging.Aside from a 5°C bump on the Ender 5 Pro nozzle temperature, the two printers are identical. Both are suited to the most common 3D printing materials – PLA, ABS (enclosure required for the best results as ABS requires a stable thermal environment), TPU, and PETG. No matter which of the two 3D printers you choose, you should buy more filament because the sample is only enough for 2-3 small objects. For the beginning, I would definitely recommend PLA, as it is the easiest filament. Here you can find more information and the best filament brands. Talking about speed, Creality marketing tells us that you can get up to ~250mm/s with a 2000mm/s acceleration. My slicer profile used was set to this acceleration setting but with about half the speed mostly because if I tried to print faster, the ringing on the prints is significant and the bed starts wobbling a bit too much for my liking. Some upgrades can be easily 3D printed on your device. Usually, these are the first changes that Ender 5’s owners make. We are talking about self-printable accessories that won’t cost you much.