We also supply a wide range of products and tools to help you get the job done with speed and efficiency, without breaking the bank. The Washers have a perforated surface to maintain maximum board surface exposure as standard adhesives and plasters are not designed to be fixed to flat metal surfaces. These fixing discs have been specially designed to provide an easy secure way to fix marmox and wedi-type insulation boards on the floor and walls. Our slimline metal washer grips tightly into the surface as they become almost flush with the board.

Because of their reinforced cement coating, the Tile Backer Boards can be screwed down to a wooden subfloor using our tile backer board washers. The Adept Manual Dial Thermostat is an easy to use simple On/Off switch and an easy to adjust dial to choose your optimum temperature. If Marmox Plastic Fixing Washers are to be used in a wet area, then sealing of the screw penetration will be required. It can be easily and quickly installed in floor screed or retro fit to your existing floor without increasing the overall height of your floors.It is the responsibility of the installer to use the correct number of discs that hold the board firmly in place. This design choice guarantees a consistently smooth board surface, primed for the addition of subsequent layers. Washers provide the essential function of distributing the load of a screw or nut to prevent damage to surfaces, especially soft wood and plastic. They also perform well with Celotex Insulation Panels, indeed any softer insulation panel that allows the washer to countersink flush into the surface, leaving a smooth finish.

These washers are made with galvanised steel and with the appropriate stainless steel screws, our metal washers grip tightly into the surface as they become almost flush with the boards. The washers are easy to fix and have been specially designed for use with Tile Backer Boards in three specific ways. The WiFi Thermostat gives you accurate and precise control anywhere in the home and is a premium choice for any household. With the appropriate corrosion resistant screws, these slimline plastic washers grip tightly and become virtually flush with the surface of the Multiboard when screwed in well. When installing any type of tile backer board onto concrete sub floor we recommend using Flexible Tile Adhesive, please make sure the floor is primed with a suitable primer before installation.

As in previous versions of the ELEKTRA MCD, the simplicity user same remains, but this time with a touchscreen. Through our giving stories, we are able to create micro-giving impacts simply by doing what we do everyday.

This can also help to reduce the chance of the fixing gradually loosening over time as well as minimising possible leaks. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

Ensure the washer does not overhang the edges of the boards and is not used to span a joint between two boards. Pro Tiler Tools, Company number: 07154275, Registered address: Topps Tiles Thorpe Way, Enderby, Leicester, England, LE19 1SU.

Depending upon the material, thickness, subsurface, and the final floor covering to be put onto the boards. This is to maintain that the flat board surface is ready for the easy unhindered application of the subsequent layers.

Each Thermopanel Tile Backer Board Washer features a perforated surface, which maintains maximum board surface exposure. We produce a wide range of wet room products, including: tile backer insulation boards, waterproofing, walk-in shower trays, drains, shower screens, underfloor heating and wet room accessories. Living Heat Ltd, Unit 1, 104 Barton Road, Torquay, Devon, TQ2 7NY - Registration No: 5466356 – VAT No: 861161442 - All images are used for illustration purposes only. EBB Clay boards should be fixed using either drywall screws or stainless screws (depending on plaster to be applied) to a timber frame at a maximum of 625mm centres for walling and 417mm centres for ceiling applications.