In this article, we will give the Sovol SV01 Pro a closer look, and test its features to decide if it’s a good alternative. This is not a huge issue, because the X gantry is pretty stable after you set the printer, but having that Z sync belt would keep the gantry more stable, especially considering that there’s no G34 support. This one is a simple magnet with a printing surface on top, similar to what you would get with an old Ender 3. Do not adjust the nozzle too low, which would leave the prints remaining on the PC sticker extremely difficult to clean. Unfortunately, this issue cannot be solved without replacing the idler with a better one but you can print a spacer to help keep the idler more stable during printing, as seen in the image below.

Sovol SV01 - Ultimaker Community of 3D Printing Experts Sovol SV01 - Ultimaker Community of 3D Printing Experts

All these measurements were taken with a Blitzwolf smart power socketwhich indicates the power draw, and it can also be used for remotely powering on and off the printer. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request.that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.

Sovol SV03 Large Direct Drive 3D Printer with Auto Leveling Sovol SV03 Large Direct Drive 3D Printer with Auto Leveling

By accepting these services, we are able to show you videos or other media content hosted by external providers. I have even drag on a piece of paper all over the print bed, which is glass with a textured surface - looks very much like Anycubic Ultrabase.Technical Specifications: ● Interface Language: English ● Print Size: 280mm*240mm*300mm ● Build Plate Size: 300mm*255mm ● Print Method: TF card, USB connection ● Print Accuracy: ±0.