Micro Mill Attachment for cutting door and window openings with a precision no other tool can match. I have not had the opportunity to test one, but I think this chainsaw attachment would be a very useful tool for a woodworker or carpenter. Alaskan Mark IV Mill Attachments The advantages of this chainsaw attachment include precision (with an accuracy of +/- 0.25 degrees), versatility, and durability. Clamping on the chainsaw is also very easy as it comes with a system that doesn’t require drilling any holes. It is barely heavy and can accommodate bars up to 20 inches long. WOLFCRAFT Bevel and Miter Box 1 6948200

Alaskan Small Log Mill Attachments can make cuts up to 13 inches deep and 18 inches wide, making it suitable for chainsaws with up to 20-inch bars. They are also very easy to use as it does not require drilling bars when clamped on the chainsaw. Alaskan Small Log Mill – G777 This Simpson winch is appropriate for nonprofessionals and is a handy tool as it reduces the stress of moving heavy things from one point to another. It is also quite versatile as it can be powered directly by an engine or connected to a chainsaw. Chainsaw Skid Plate Attachments The miter mill attachment is very precise, versatile, durable, and accurate. This attachment gives you an amazing accuracy of +/- 1/4 o. Furthermore, it’s very easy to clamp this attachment to your chainsaw. It comes with a patented clamping system, making it possible for the attachment to be clamped to your chainsaw bar without drilling any holes.

Winch Attachments

A winch is a mechanical device that pulls in or lets out a rope or a wire. It is also used to adjust tension in a rope or wire. As mentioned before, they are primarily used to pull heavy loads across rough work areas or to gather chopped-down trees or branches without much stress. It uses the chainsaw motor it is attached to. An Oregon-style ripping chain is especially factory ground to make dimensional boards or planks from larger timbers. ● Headcutter Miter Attachment: Precise in its cuts, durability, and compactness, this tool is easy to carry and travel with. It is compatible with chainsaws up to 24 inches long. Winch Attachments Mini-mill attachments are excellent for squaring and flattening timbers (edging). They usually have a 2 -by- six guide rail (12 feet) that you can easily clamp to the chainsaw bar. Also, you can buy the v-rail sections by themselves. SPECSTARS TRONGWAY Mini Mill and Edger Attachment Angle Iron Log Guide is explicitly used to hold in place the chainsaw guide bar (the steel bar that the chain is wrapped around) perpendicular to the log. With this, you can achieve accurate square cuts for butt-to-butt log splicing (making the two ends of different logs fit perfectly). In cases of logs with uneven surfaces, four gripper bolts are used to secure the holding. It can be used for logs with a 6 and 15 inches diameter. Angle Ir on Log Guide

This chainsaw mill is easy to install, lightweight, and durable, making it a tool anybody can use. Also highly sought after for its sheer strength. Mini-mill Attachments Chainsaw winches may either be cable-drum types, such as the Lewis chainsaw winches, or rope winches, such as the Simpson winches. Cable-drum type winches are better suited for construction purposes because of their greater pulling power. In contrast, the rope-type winches are better suited to pulling loads in the woods or hunting. The log wizard attachment is indeed a “wizard” as it converts your common chainsaw into a completely different tool. A log wizard attachment is perfect for applications such as debarking, planning, notching, post sharpening, knot removing, and routing. The head cutter miter attachment easily clamps to any chainsaw in seconds and transforms it into an enormous vertical cutting jigsaw. It’s adjustable to 75˚ from vertical. It features a strong, wide base plate to support the chainsaw’s weight through its angular range fully. This way, it provides stability, allowing accurate freehand cuts with a long chainsaw bar.A stop automatically switches the gearbox to neutral when the drill is jammed and lets whoever is operating the machine reverse the auger from the jammed positions.

The Alaskan Small Log Mill attachment is ideal for milling lumber into beams, slaps, and planks. It clamps onto the chainsaw bar without the need for drilling. FeaturesThe Office for Product Safety and Standards (OPSS), the UK’s national product safety regulator, has issued a Safety Alert for a chainsaw disc attachment that has been incorrectly sold for use with angle grinders. This attachment tool can make angle cuts up to 70 degrees in one direction and 30 degrees in another. They are primarily used in milling roof trusses – the structural wooden framework that bridges space between a room and its roof and supports the top. Also popularly used to make v-cuts, curve cuts, and stopped cuts on wood. OPSS has taken this important step because the chainsaw attachments are not designed to be used with angle grinders and could cause serious injury or even fatality.

This tool can be used by anybody once assembled. It is very versatile and handy. Easy to use on your drilling projects. Log Wizard or Debarking Attachments OPSS is also telling any business that sells these chainsaw discs as attachments for angle grinders to remove them from the market immediately as they do not comply with the Supply of Machinery (Safety) Regulations 2008. Headcutter Miter Attachment is used to convert the chainsaw into a powerful vertical cutting jigsaw. It is adjustable to 75 degrees from the vertical and easy to clamp to the chainsaw. A winch is a mechanical device capable of pulling in or letting out a rope or wire. It can also be used to adjust the tension in a rope or wire. This particular tool can be used only by homeowners or small-time carpenters making furniture around corners of the house like cupboards or roof designs. Professionals making roof beams or wooden pillars for large buildings may not be inclined to use this tool. Drill AttachmentsWeighing in at just a pound, the DrillSaw® is much lighter than a traditional gas-powered chainsaw, making it easy to maneuver and requiring less arm fatigue. The BAILEY Log Wizard Debarker is ideal for debarking trees or poles for bridges, barns, or fences. You can easily attach it to almost any 65cc or under chainsaw, but it requires bar drilling and saw chain lengthening. Features The Granberg-style ripping chain features one set of scoring and one set of clearing cutters. The scoring cutters (file at 20˚) cut a groove down on both sides of the kerf. The subsequent two center clearing cutters (file at 0˚) cut the center ridge missed by the scoring cutters. The depth gauges have to be lowered depending on your chainsaw’s power. – Oregon: Cable-drawn type: These are also known as Lewis chainsaw winches. They have more pull force and are mainly used for construction reasons. They can pull up to 4000lbs of load. The first is a winch, which is very helpful in pulling loads across the work area or gathering logs. It helps reduce the workload, especially if the terrain is rough.