PAY ATTENTION TO THE LIMITATION】The C Splitter does NOT for monitors,Only support ONE audio outputs two usb-c port can not work with 2 headphone at the same time(NOT For Power input ),NOT for monitor display，Do NOT work with HDMI cable, Apple Watch. This is a USB-C female to USB-C male adapter designed forpower output or data transfer and it will NOT support video signal transmission.Support 5V/0.9A power output. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. Power Delivery is a negotiated connection. Both devices communicate with each other to establish their maximum voltage and current capabilities and not every device can take the same voltage. At the start of the connection both sides expect 5V, then they exchange information and synchronise up to a preferred voltage and power level. Hi there, I'm in need of a USB Type C Splitter, Hub, OTG Adapter ("Power + Data") etc etc for my Quest, I'm hopping to find suggestion's for Splitters that are preferably known to work safely with the Quest although I would truly appreciate any other recommendations as well...

Plugging in a laptop and then a mobile phone to one of these splitters would mean that the phone would see 20V instead of 9 or even the "default" 5V. You must ensure both hubs are connected to a computer that is relatively new. This is because connecting multiple devices to an old computer can result in the computer having slowed performance. We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub. When two random USB-C chargers or ports are together, the user is absolutely safe. There is no harm that can come to them by connecting two hosts or sources together. However, when two active power supplies are connected, there is a chance that the situation might become unsafe and problematic. Q2. Is USB 3.0 the same as USB-C?Anker’s hub was among the fastest we tested to deliver data under load, including simultaneous data transfer between USB-A ports while the SD ports were active. The hub offers an 18-month warranty, and it even ships with a carrying pouch. Even though two USB-C hubs may have wildly different brand names, you may sometimes find that they’re otherwise identical or just very similar. https://discussions.apple.com/thread/251751987#:~:text=response%20to%20TheHorror-,The%20full%20USB%2DC%20signal%20cannot%20be%20’split’%2C,what%20you’re%20looking%20for. Recent laptops have begun offering a USB-C technology called HBR3 with DSC, which we’ll explain more fully in the sections following our recommendations. The bottom line is that the technology offers something similar to the DisplayLink technology below, but as an industry standard. In our experience, although the technology is somewhat supported in laptops with 11th-gen Core processors, it works best in 12th- or 13th-gen laptops. Overall, Anker’s hub is well designed, with adequate spacing between the two 5Gbps USB-A ports. There’s also a 5Gbps USB-C connection for data, plus a second USB-C port for power input at up to 85W rated. (The charger allows up to 100W in, but supplies 85W.) An HDMI port allows for 4K/30Hz video or 1080p/60Hz video to a single external display, standard for the category. Ethernet is excluded, however, so you’ll need to use Wi-Fi instead. Cord length is about 8.5 inches, above the standard 6-inch length.

In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). Many mobile phones will negotiate up to 9V from a PD charger, laptops and other devices may work at higher voltages. I know of some that take 15V and some that take 20V. Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable. Sabrent's HB-U3CR looks like it was built for MacBooks, thanks to a gunmetal gray aluminum chassis and a stylish, slanted design that will prop it up at an insertion-friendly angle on any table. However, it's an equally strong choice for use with a PC laptop that has USB-C ports and needs a few USB Type-A connections.Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5.

The best case would be that the phone has massively defensive charging circuitry, but I'd be surprised if it could handle 20V for the smaller components used in phones. Most likely it would burn out the charger circuit. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. There are no USB-C splitters that split one male USB-C into two USB-C ports. At the current moment, a user’s best bet would be to get a USB-C hub and connect a power supply. The user can then use this to charge multiple devices using one hub. How A USB-C Splitter Differs From A USB Hub A USB-C port splitter is one that allows different devices to be connected to your computer. This will allow the user to use multiple devices to perform different tasks. This form of a port lets devices like scanners, speakers, and cameras connect to the computer. Lasuney’s 10-in-1 hub (two USB 3.0 ports, two USB 2.0 ports, two HDMI 1.2 ports (4K@30Hz), DisplayPort gigabit ethernet, microSD/SD, USB-C power input) offers a lot for your money, including an unusual mix of not one, but two HDMI ports, and even a DisplayPort. Thanks to ethernet support, the hub can replace many of your wired connections. Power input is rated at 100W in, with about 87W available to the laptop.USB-C splitters are devices that divide one USB port into two or more lines, each of which connects to a different device. The splitter allows for the computer to retain its smooth running and avoids slowing down the performance of the computer. USB hubs are multiple adapters, like USB 2.0 and USB 3.0, that allow different devices to be connected to one computer. It allows the user to interact with multiple USB devices at the same time. A hub can also have ports for wired connection and display preferences. Using USB-C Splitter For Dual Monitors Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. https://www.minitool.com/lib/usb-splitter.html#:~:text=or%20USB%20Hub-,An%20Overview%20of%20USB%20Splitter,and%20other%20devices The USB hub allows the user to connect about 6 to 7 different devices to the computer. This expands the functions the computer can perform and gives the user a chance to do all they need to do while having one single device. Can you have multiple USB-C ports?

Unfortunately, there is no such thing as a USB-C splitter in existence thus far. A USB cannot simply be split. However, there are devices that can act as a USB splitter would. An example of this is the USB hub. Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.

Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD. We looked at how SD cards were inserted—you’d be surprised how many don’t work unless they’re inserted upside down! If you need a splitter then buy an active hub. I cannot find any that advertise multiple PD outputs (only pass through for a laptop) and this would likely need a lot of expensive power conversion to handle, see the rest of my answer below. Upstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C.