Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles.

Joints must be a minimum of 3mm wide and 25mm deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Joint-It Simple can be applied even when it’s raining or wet. Instead of waiting until the rainy months have passed to finish jointing a patio, use our paving grout to get the job done sooner. Joint-It Simple– can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. 1. Prepare The AreaJoint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean annually to keep it looking new. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results.

Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnesA cancellation request by the consumer must be put in writing to [email protected] and received by the Company within the 7 working day period. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Simply the best – Ready to use paving jointing mortar, ideal for jointing paving slabs, cobbles and natural stone. Rain or shine Joint-It goes in fine.