Structure–property relationships in glass reinforced polyamide, part 2: The effects of average fibers diameter and diameter distribution. Polym Compos. 2007;28(3):331–43. 10.1002/pc.20260 Search in Google Scholar The XRD patterns of the plate. 4.4 Microstructure analysis and of the dried plate treated by the three routes cycles, in every cycle: −40 to 130°C, 10°C/h, the highest and lowest temperatures were maintained for 4 h, room temperature was maintained for 2 h. From the comparison and analysis of the three routes, it can be concluded that the re-dried plate treated by route II is preferred for ensuring the dimensional accuracies, mechanical properties, and the employment character of the medium voltage environment. 5 Conclusion

display the information in a consistent format. Users requiring more precise data for scientific or engineering HSBC, one of the largest banking and financial services institutions in the world, serves millions of customers through its four Global Businesses. HSBC has around 6,600 offices in 80 countries and territories across Africa, Asia, Europe, North America and South America, and around 60 million customers.

Effect of flame retardant on properties of glass fibers reinforced polyamide 66. Eng Plast Application. 2002;10:9–11. Search in Google Scholar Tecamid® 66 is a registered trademark of Ensinger; Murylon® A is a registered trademark of Murtfeldt; Ertalon® 66 SA is a registered trademark of Quadrant; Sustamid® 66 is a registered trademark of Röchling; Zellamid® 250 is a registered trademark of Zell-Metall; Annealing effect on semi-crystalline materials in creep behavior. J Therm Anal Calorim. 2002;69(1):37–52. 10.1023/A:1019925420733 Search in Google Scholar The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66. Polym Test. 2016;50:15–25. 10.1016/j.polymertesting.2015.12.008 Search in Google Scholar

Surface fractography of the plate treated by the three routes: (a) and (d) route I (b), (e) route II, and (c) and (f) route III, in which (a)–(c) were obtained with a magnification of 500, and (d)–(f) were obtained with a magnification of 1,000 times.The structural characterization of the plates (untreated and treated by the three routes) were carried out by X-ray diffraction (XRD, D/max-2500/PC, Japan). Data were collected over the range 2 θ = 10–40° in the fixed time mode with a step interval of 0.02. The shape of the central circular hole of the plate: (a) without the “supporting mold” and (b) with the “supporting mold.” Courier offering global express distribution, logistics and international mail service of parcels and freight. Performing measurements using a micrometer showed that the dimensional accuracies were improved after the three treatment routes; however, there exist some nonnegligible differences between the accuracies obtained with the three routes. 4.1.1 Dimensional accuracy of the central hole The central hole diameter of the plate by the three routes: (a) DDT, undried parts, (b) DDT, dried parts, (c) DDL, undried parts, and (d) DDL, dried parts. 4.1.2 Periphery dimensional accuracies

Influence of fibers length and compatibilizer on mechanical properties of long glass fibers reinforced polyamide 66. J Reinforced Plast Compos. 2012;31(16):1103–12. 10.1177/0731684412454199 Search in Google Scholar Data availability statement: The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. We advise that you only use the original value or one of its raw conversions in your calculations to minimize roundingAll metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.