An unknown program running on the Arduino could set the pins to the wrong state and short circuit the STC-1000.

STC-1000+ is only compatible with the A400_P version of the STC-1000 as this sports the Microchip PIC16F1828 microcontroller, for which there are open tools and freely available documentation. Elitech STC-1000 digital temperature controller thermostat is one of the most classic thermostats from the Elitech with automatic changeover between cooling and heating. When the temperature of your wort drops below the ideal temperature, the controller increases the temperature, so it continues fermenting. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition. If you are not familiar with Arduino, you can read more about it at the arduino webpage or wikipedia.

Poznámka: Regulátor teploty může pracovat s vytápěním a chlazením zařízení současne nebo jen s jedním z nich. Když připojím Termostat do sítě, tak mám na „vstupu 1“ napětí, signálka ukazuje „topení“, ale na vstupech 5 a 6 mi zkoušečka (jednoduchá tužková do zásuvky) neukáže žádné napětí, tj.

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture.This mini Temperature Controller is an excellent and convenient multifunction device for controlling temperature in any of your home projects. If measured temperature temperature set-point, the controller stops heating and cooling indicator is off. The controller reserves an interface of RS-485 communication function for further connection to an Elitech IoT module which makes remote control available. The first thing that is needed is to upload the sketch Before the connections are made from the Arduino to the STC-1000, the sketch needs to be uploaded to the Arduino. Press ▲ or ▼ button again to increase or decrease the value and press to back to parameter code display.