While it is not dangerous to print expired or incorrectly stored resin, the chances of success are much lower. Even if you succeed to print, the material will probably have lost some of its original qualities.

Easy Leveling System: Simply lower the printing platform atop an ordinary piece of paper. Then hand tighten the leveling nut to complete the leaving process. The machine offers a build volume of 130 x 82 x 160 mm that lets you print a single medium-sized model or simultaneously produce a few smaller ones. It is compatible with any 405nm UV resin that can be found on the market, allowing you to benefit from the freedom of choice. All of this makes the LD-002H a perfect device to produce tabletop miniatures, prototypes, art designs, jewels, high-precision models, dental impressions, and much more. All in all, the Creality LD-002H is an excellent resin 3D printer that offers a decent build volume and lets you produce remarkably detailed outputs in a swift and consistent fashion. Thanks to being equipped with a monochrome LCD matrix, the LD-002H offers prolonged service life alongside low power consumption. This is an affordable and easy-to-use device that will be a perfect choice for both entry-level and more experienced makers. The printer’s parameters make it a perfect device to produce tabletop miniatures, prototypes, art designs, jewels, high-precision models, dental impressions, and much more. Perhaps you do not have a clear conception of the change in size. Just imagine you just can print phone holders, small decorations, or toys before, but now you can print tall statues, dinosaurs, and even complex architectural modeling. The spreadsheet is not a substitute for resin validation, but a good starting point for it, allowing you to build on what others have already worked out.

Preview

Powerful Slicer Software: The Creality LD-002H resin printer is supported by CHITU BOX software for slicing. CHITU BOX is easy to use, with one-key functions to add a model, adjust supports, model size, etc. This time though, the Creality team decided to make the printer’s acrylic cover red instead of orange, making for a more clear distinction between their resin 3D printer iterations. Open printers offer you a great degree of freedom, but they also require you to learn a bit more about slicer settings compared to closed systems. So the LD-002H resin 3d printer adopted 1620*2560 higher resolution with higher precision. Now the machine is able to manifest every detail of the model to us. This satisfies your needs for higher-quality products.

Here comes the good news. The new print LD-002H adopts an upgraded UV Light Source Module and an upgraded transmission system. Compared to the LD-002R resin 3d printer, it greatly improved the stability of the light source and the success rate of printing. This LD-002H is still equipped with a charcoal filter to reduce the diffusion of resin odours, a graduated VAT, a maintenance hatch on the side for easier screen replacement, and the power button on the front.

Slicing Software

LD-002R 3d printer can remove part of the stench of exposed resin from the air. LD-002H resin 3d printer upgraded its air filtration system with activated carbon, so it can effectively reduce the odor and impurities and more environmental-friendly. You can always figure this out through some experimentation, but using ones which are already confirmed by other users can save you a lot of time and frustration. Does this is really a great change? With this new printer, you no longer need to buy various kinds of toys for your children. You may even start your own business using the model featuring wide choices, easier operation, and higher efficiency.