Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. To access the command line interface, you can use either a local, serial connection, or a remote connection (Telnet or SSH) with a computer on the same network as the Network Management Card (NMC). At the command line interface, use commands to configure the NMC. To use a command, type the command and press E NTER. Commands and arguments are valid in lowercase, uppercase, or mixed case. Options are case-sensitive. Use the user interface or the command line interface to view the status of the UPS and manage the UPS and the NMC. You can also use SNMP to monitor the status of the UPS. Updating or flashing firmware is necessary to implement new features, correct bugs, or when moving the network card from one UPS family to another.

In the user interface, recent events on the Home tab; the menus on the UPS tab; and the menus of the Logs tab including the event and data logs, accessible under the Events and Data headings. (The event and data logs display no button for this user to clear the log). Description: Configure the power parameters: this enables you to show and configure transfer points, sensitivity and output voltage. To enable or disable these access methods, use the Web interface. On the Administration tab, select Network on the top menu bar, and then the access option under Console on the left navigation menu.Run a terminal program (e.g., HyperTerminal), and configure the selected port for 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control. You can access the command line interface through Telnet or SSH. Telnet is enabled by default. Enabling SSH disables Telnet. The default values for these three settings generally do not need to be changed: -v : APC

Kit includes all necessary parts to install an AP9635 for all G5000 UPS serial numbers and firmwares.

Create a Support Ticket

Description: View the existing RADIUS settings, enable or disable RADIUS authentication, and configure basic authentication parameters for up to two RADIUS servers. Example: To configure the TCP/IP port to communicate using 100 Mbps with half-duplex communication (communication in only one direction at a time), type:

Find the firmware file. This one is “Network Management Card v6.5.0 Firmware for Symmetra 3-Phase with AP9630/AP9631/AP9635” My question is for anyone that has used or had exposure to both series - Is there really a drastic difference other than the network speeds between the two series. An since it’s just for monitoring is the drastic cost differential worth the investment between the 30's and 40's? Last does the AP9640/41 do things the older series cannot? All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. Description: View the date and time you retrieved the event log, the status of the UPS, and the status of sensors connected to the NMC. View the most recent device events, and the date and time they occurred. Use the following keys to navigate the event log: The Stat field reports the NMC status. The middle status varies according to whether you are running IPv4, IPv6, or both, as indicated in the second table below.

Connect the provided serial cable (part number 940-0299) to the selected port at the computer and to the configuration port at the Management Card. Provides the ability to export a user configuration (.ini) file from a configured card to one or more unconfigured cards without converting the file to a binary file.