At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once. This beast is almost 9 inches long and weighs 1.8 pounds. Every port has a power switch and a bright blue LED indicator. You can turn ports on and off individually, and the light will tell you what’s powered and in use. It’s plug-and-play compatible with PC, Mac, and Linux systems. It has a built-in surge protector to keep all your devices and the hub safe and secure from electrical failures. USB Type-C has plenty of perks, and with one of the USB Type-C hubs you might be considering getting, you'll be able to copy files at USB 3.1 speeds, deliver enough power to charge a laptop, or use Alt Mode to send other types of data using DisplayPort or Thunderbolt 3connections. Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great fully featured hub that’s still affordable and – most importantly – just works.

In addition to the SSD, the Anker PowerExpand has an HDMI out port and two USB 3.x Type-A ports that operate at 5 Gbps. There’s a USB-C power pass-through you can plug your laptop’s power adapter – up to a 100-watt unit – so that you can charge your computer while using this hub (the USB-C port does not work for data transfer; we tried). USB Network Gate: Windows, Linux, or Mac host device. Most powerful, setup isn't complicated. Made by same developer as FlexiHub, so you can use the FlexiHub interface on top of this. Secure with 256-bit encryption. The durable aluminum shell rounds out the features list and offers a sleek look. It matches particularly well with aluminum Chromebooks, laptops, and most MacBooks. Windows® 7, Windows 8.1, Windows 10, Windows Server® 2012 R2, Windows Server 2016, Windows Server 2019 and Linux I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa.

Short of ports and crucial connections on your laptop, tablet or PC? Splash out on a USB-C hub and enjoy all the connectivity you need

This Raspberry Pi HUB HAT adds 3 USB ports and an RJ45 Ethernet port to your Raspberry Pi, which is great when you need a stable wired Ethernet connection on a Raspberry Pi Zero! Don't forget to grab an RJ45 cable too! If you're in the market for a simplistic USB C hub that does everything you need, look no further than the Anker 341 USB C 7-in-1. This model has all the ports most people require for daily use without extras that you'll never use. It's small and portable, so you can toss it in your laptop bag. It even comes with its own fabric pouch to protect it in your bag. It has two USB C ports, two USB 3.0 ports, an HDMI port, as well as a Micro SD and SD card reader. We found this was just the right amount of ports for most people — enough to connect an average amount of tech. On the hunt for a USB hub? We bought the top 11 models to test in a head-to-head showdown to see which are the best for various applications. These devices come in a vast array of designs and styles for all kinds of different purposes. Over the course of several weeks, we used each hub in the lab and at home to carefully inspect them for their ports and features, how well they travel, and their looks. In the end, we identified which models are the best overall, which is the best bargain, which is best for travel, and which are the best for specialized purposes.

Even though two USB-C hubs may have wildly different brand names, you may sometimes find that they’re otherwise identical or just very similar.If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place. It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Raspberry Pi Zero 2 / Zero W / Zero WH. Connection Notes Recent laptops have begun offering a USB-C technology called HBR3 with DSC, which we’ll explain more fully in the sections following our recommendations. The bottom line is that the technology offers something similar to the DisplayLink technology below, but as an industry standard. In our experience, although the technology is somewhat supported in laptops with 11th-gen Core processors, it works best in 12th- or 13th-gen laptops. This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price.