Variable-Speed Timelapse Allows a user to program a path where the gimbal can adjust is movement speed.

Moza Air 2 Gimbal LN101084 - G12201 | SCAN UK

Devices that have a power out port are also announcing at least the voltage and wattage they are meant for. For instance, a normal power supply (I suppose the one that comes with the gimbal) states the input/output voltage and amperage, and from these you can calculate wattage. There must be max values for the wattage of the gimbal power-out ports, and I would need to know them. To decide whether to buy a Moza Air 2 gimbal, I will need the information I asked above and in the first message. This is not necessarily a camera issue. I just would need to know the basic info about the power-out ports of Moza Air 2. And I’m wondering why are you so resistant to tell it. If you need to restore the gimbal to default settings. You can access Configuration and select Set Default. Or from the gimbals handle configuration. Are there two “versions” of Moza Air 2, one that has a 12V DC OUT and the other with a 16.8V DC OUT?

This stabilizing gimbal for DSLRs and mirrorless cameras gives the DJI Ronin-S a run for its money

May I know the model number of your camera? The 12V/16.8 DC OUT are used to power BMPCC 4K cameras.

MOZA Air 2 Gimbal Stabilizer The Complete Guide to the MOZA Air 2 Gimbal Stabilizer

Now position the camera with lens pointed up, in this position we will be able to adjust the height of the camera’s center of gravity. Note leaving this adjustment in the lowest possible position does not guarantee the balance is correct.

To use the Dial on the gimbal’s handle to control the iFocus, press M button to select channel F1. To control focus over usb, select channel Fe. An important feature of the MOZA Air 2 is the Tripod Mode. This mode will suppress static drift, which is only noticeable when a gimbal is place on a stationary tripod. Tripod Mode can be accessed from the MOZA Master App under Gimbal Settings, Advanced settings. Also Tripod Mode can be accessed from the Air 2 handle under Advance.

MOZA Air 2 3-Axis Handheld Gimble Stabilizer/camera

There are many facebook users of the moza and also people on another forum saying they get problems and fried their gimbals with long term use, I am not the only one. It might be that many of Gudsen's gimbals are defective though, I don't know. Select the correct camera connection cable for your camera. The MOZA Air 2 can support Sony, Canon, Panasonic, Nikon, Fuji, and, Lanc. Connect the cable to MOZA Air 2, and than the camera. Press the menu button, highlight Camera Set, then press right on the smart wheel, Highlight Select, press right, tap down to highlight the correct camera model, press right to select that model. Some camera models can be powered and charged over the USB camera connection cable. Now that your camera is connected you can use the MOZA Master app to program a timelapse, control ISO, and use the power button to activate the camera’s shutter. The MOZA Air has a total of 11 different filming modes. Some highlights are Inception mode, sport gear mode, and fpv mode. To adjust the response of the of the motors rotate the smartwheel. So far I haven't needed to power camera from the Gimbal but I thought it would be a useful feature for long shoots. The software will automatically identify the device and load the firmware, press the upgrade button, and wait for about 10 seconds

The Air 2 features a clear line of sight to the camera’s monitor. By shorting the yaw arm the roll motor is placed below the camera. Doing so gives the user a clear line of sight to camera’s monitor. With the MOZA Air2, following the action is uninterrupted. Smart Trigger Filming Modes: The smart trigger can perform a few different filming modes. When the smart trigger is pulled it will hold the position of the gimbal. To resume gimbal movement release the trigger. We are sorry that after consulting our supervisor, we cannot provide you the asking information as these information are sensitive information to us,