Position the thermometer close enough that the spot of focus includes only the part of the catalytic converter that needs measuring (as below) and not any surrounding parts which may influence the reading

The Bi-metal pipe thermometer takes some time in detecting the temperature of pipes and radiators. The spring provided is ideal for small pipes and in case of larger pipes you can use a tie-wrap, a larger spring or a wire. These thermometers need recalibration and it is quite easy to do so with these kinds of pipe and radiator thermometers. If, however, you need better, swift readings, we suggest you buy the infrared thermometers which have a greater accuracy and exactness in the readings they provide. These thermometers have numerous uses across a wide range of applications, industries, and environments. Just a few examples of possible uses include: Cheshire Design Centre has worked with one of the longest established manufacturers of stove thermometers to design a Stove Top Thermometers which is suitable for use on the top, front or side surface of your wood burning or multi-fuel stove. They are attached magnetically and require no tools for installation. Place the Thermometer on the top, front, or side of a flat or curved surface. The built-in magnet will maintain its hold on steel up to temperatures of around 800°F (425°C).

The optimum position is on the flue collar, or if not practical, as close to the collar as possible for a stable reliable place for monitoring the stove and flue gas temperature . Aside from the emissivity, another key point to consider when using an infrared thermometer is the field of view. This may also be referred to as the distance to spot ratio. For example, for a 12:1 distance to spot, at 12ft from the object, the detector will be looking at a spot on the object that will be 1ft in diameter. Sometimes, IR thermometers include a small laser to enable the user to see the centre of the focus spot. Alternative models feature multiple lasers which show the full spot of focus. How Do You Calibrate an Infrared Thermometer?

The Pipe Radiator Thermometer, as the name suggests, is used for determining the temperature of the said surfaces. This thermometer can be kept on the pipes to regulate their temperature. There are various needs for which this thermometer can be used. It can be used to detect minute changes in the temperature of pipes and radiators, and can even be used to keep the temperature constant through constantly updating the operator. The temperature range of the Pipe Radiator Thermometer is from zero to 120 degrees Celsius. To make sure that the pipes are giving the perfect temperature for your home or office, the Pipe Radiator Thermometer is best suited to your needs. In countries where the market for wood burning appliances is more developed there is a stove fan thermometer available. These are used to indicate the temperature for optimal fan performance and are located on the top of the stove. The mechanism for the Fan thermometer is the same as the stove top thermometer but the graphics have been changed to give a better indication at a glance. Flue pipe thermometers are available on the market usually supplied with either a self-tapping screw or a wire to wrap around the flue pipe. These thermometers are suitable for single wall flue pipe only. A large digital display makes it easy to read off the measurements from this Thermapen. The range is also huge and Thermapen can be used to detect temperatures ranging from -49.9 to 299.9°C. To save battery life, the thermometer can automatically switch off in ten minutes. This feature helps to maximise battery life. However, if this feature does not suit your needs, you can turn this off. Two lithium coin cell batteries power the Thermapen and can work for 1500 hours at minimum. Once you have recorded the two readings, you can then analyse the results. A catalytic converter working optimally should be hotter at the rear than the front. If the two readings are similar or the reading from the front provides a higher temperature, this indicates that there may be an issue with the catalytic converter. Can Infrared Thermometers Measure Water?These are bi-metal thermometers upon delivery they may need adjusting / calibration to a known temperature due to vibration when in the post A room thermostat controls the heating in your home. If the room's temperature drops below your chosen temperature, the thermostat will switch on. Once the room has reached the chosen temperature, the thermostat will turn the heating off, preventing overheating and reducing energy consumption. This can help reduce your home's energy consumption.

If the single wall flue pipe is made from enamelled steel then a magnetic fixing thermometer can be used however it is important to know that if the stove pipe exceeds a temperature of 400°C then the magnet will fail and the thermometer could fall to the floor which could in turn damage the floor covering. In the Pipe and Radiator Thermometers category, there are various brands to choose from. Thermometers Direct has its own thermometers and also provides other brands like ETI so that the customers can choose what’s best for them. All these brands are chosen by Thermometers Direct keeping in mind the quality our esteemed customers expect from us. The Pipe and Radiator Thermometers provided by Thermometers Direct and other brands are correct, precise, dependable and up to date with the most recent technology. The magnetic thermometer we offer are ideal to attach to the radiator or pipes you intend to measure the temperature of. The temperature of the heat that is dispersed by the radiator or pipes will automatically be registered on the thermometer. These accurate readings will give you a precise idea of when to bleed the radiator to get the desired temperature. These Pipe and Radiator Thermometers can also be used to regulate the temperature of pipes in winters. This prevents the pipes from freezing and adding to daily stress. All of our Radiator and Pipe Thermometers are proven to be durable and stay damage-free for longer periods of time as compared to other brands. Most of the thermometers are waterproof and this helps to retain them in new condition. You can freely use the device without worrying about the risk of damaging it. Waterproof thermometers are the best for measuring temperatures of pipes which may have leaky holes oozing water. Thermometers Direct offers value for your money and provides a great after sales experience and hassle-free delivery. We sense our customers’ needs perfectly and have been delivering products that are tailored to these needs since 2004. Next day delivery is extra but we can not be held liable for the carriers delaying the (WEEKENDS AND BANK HOILIDAYS ARE NOT INCLUDED IN WORKING DAYS). Highlands and Islands / IV BT, IM TR 21-25, HS, KA27,28, KW1-3, 5-15, PA20-49, 62-77,61,78,PH17-26, 30-44, 49-50, ZE1-3 postcodes takes 48 hour

We have professional infrared digital thermometers to help people from the industry that need professional, advanced thermometers. One such thermometer is the Infrared Thermometer DT-8862 Professional for high temperatures. Appropriately priced, these thermometers deserve a place in the tool box of any professional. Also available in variations for extreme high temperatures, this thermometer is the best there is. Once the parcels have left our premises the responsibility for delivery is with the Royal Mail or our Carrier. Pipe Thermometr & Radiator Thermometer At Thermometers Direct, we keep an eye on our customers’ needs. So when our customers want to monitor the temperature of pipes and radiators accurately, we have the range that’s just perfect for their use. Our assortments of waterproof thermometers, magnetic thermometer, clamp probes and infrared thermometers are best for measuring pipe and radiator temperatures. Getting an accurate reading is vital if you are balancing radiators and here is where Thermometers Direct can help you. As IR thermometers only measure the surface temperature of an object, as already mentioned, they cannot measure the temperature of parts inside. This is also applicable to clear Perspex panels, for example. To get an accurate measurement, it would be necessary to open the enclosure and point at the specific part that needs measuring. This does involve inconvenience at best, and at worst, considerable danger if high voltages are present.