Post Office return is not available for items over 1.5m in length or 4kg in weight. For these items following the guidance below, you can help us to help you when a product is not what you expected, or is faulty. There can be many reasons why you may need grinder, whether it is to shave the rust off a metal part, polishing and cutting tiles, or even fix your ugly paint jobs here and there, you can accomplish all that without dropping your wallet on an actual grinder. Grinders are pretty pricey and if you do not plan on using it for a lot of jobs then you would be better off with a grinding attachment. Scottish Islands: HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3

For all purpose grinding, such as cleaning up metal or sharpening tools, I recommend a standard grinding wheel as it is a one size fits all. If you do not feel like going out and buying the grinding attachment and you only need to sharpen a small item, I will show you how to make a one time grinding wheel from an old CD and sandpaper. Be aware that this will be only suitable for sharpening/grinding small items and even then It won’t be that good… Some drills have a special screwdriver made specifically for the drill head. If that is the case then make sure to fully insert the arbor adapter in and use the screwdriver to tighten the holes on the drill head. This same assembly method can also be used for putting on other attachments like a wire brush for polishing, a metal cutter to cut tile, wood and metal, or sandpaper for sanding and buffing. For cleaning paint and rust, the wire brush wheel will finish the job faster than any other grinding wheel. Wires tend to fly off this wheel over time and can scratch the skin pretty hard without protection. Make sure to choose a high quality wheel for this one and do not cut corners on price.Hopefully, you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By Scottish Highlands: AB36-38, AB55-56, FK17-21, IV1-39, IV52-54, IV63, KW1-14, PA21-40, PH19-26, PH30-41, PH49-50 When operating the grinder there are a few safety tips that you should keep in mind if you still want to keep your hands and fingers after this. Rule number one is to always unplug the drill or make sure it is switched off whenever you change out the wheel. The second rule is to never apply pressure while you are grinding. This is because the speed will take care of the hard lifting and pressing down will only break the wheel in pieces causing the shard to possibly cut your eyes. Some items are shipped directly by the manufacturer. In this case, the courier depends on manufacturer’s selection. Please see the below table for specialist direct from supplier delivery services.