The principal aim is to ensure that the coalescent solvents are the last ingredient to leave the paint film. This occurs naturally on warm days with low humidity, above the dew point etc. Chalk paint is most commonly found on furniture and is often water-based, making it relatively easy to remove. The new UK legislation is based on EU directive 2004/42/EC which all European Union member states must introduce. It covers coatings applied to buildings, their trim and fittings, and associated This class of paints and coatings offers limited breathability, with a lower capacity for allowing water vapour to pass through their film. While these products might be suitable for certain applications, they might not provide sufficient moisture regulation for older buildings with solid walls or those prone to dampness and condensation issues. SD Class 4 (Low Breathability): sd value > 1.5 m

Silk: Gives a high-sheen finish and is the hardest wearing of all the emulsion paints. Good in humid areas. Specialist paint finishesThere have never been more paint finishes on the market, each with their own particular use. Here are our tips on what to use where. Gloss paint Zinsser AllCoat Exterior is an ultimate performance, satin or gloss finish, all surface paint designed to offer up to 8 years’ protection on a wide range of exterior surfaces. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more. Water-based paint is easy to remove, so don’t worry if it’s made its way into your carpet! If the paint is still wet, dab at it gently with a cloth to soak it up. It is important to make sure that the surface is clean and dry before painting and that the paint is well-mixed. Can you use matt emulsion as an undercoat on walls?

For wet paint, gently dab at the area first to get it all off the floor. Wipe up smudges with warm soapy water.

Similar products

Paint colour testers tend to only come in one type of paint/finish — matt emulsion. (Image credit: getty images) 5. Satin Textured or smooth, for painting over rendered walls, and flexible so it can expand or contract with changes in temperature. Choose one containing a fungicide to prevent algae and mould. Make sure the wall is cleaned before painting (for example with a pressure washer), especially if you live within three miles of the sea where salt deposits can build up and react with water-based masonry paint. Painting onto a dirty wall can result in the paint peeling. Shed and fence preserver Just be aware that you need to rinse all the stripper off with soapy water before you start painting. Heat gun