Furthermore, the drying time is extremely quick when compared with other brands such as Gyproc’s Easi Fill, and with a drying time of just 3 hours, you can be painting the very same day. This 10-ounce concrete crack filler fits in a standard caulking gun and flows easily, allowing users to squeeze it into small or large cracks without trowels or putty knives. If you’re looking for a filler that will take care of minor cracks, I’d recommend Toupret’s Fine Surface Filler. Keep in mind that you need to rub the surface with sandpaper to give smooth fins before applying a second coat. We first consider how easy the filler is to use, whether it goes on smoothly and is easy to apply, as well as how well it covers up damage.

MagicEzy Tile RepairEzy (White) - Ceramic Tile Chip Repair

Multipurpose fillers can be used to fill gaps and holes in walls, most provide a smooth surface and can be sanded down after application if required. It can absorb a significant amount of water and therefore it is not suitable for a humid environment outdoors. Hydraulic cement is a dry mix (sometimes available as a premix) that you can apply to cracks in areas frequently exposed to water, such as pools, foundations, cisterns, and outdoor fountains. We did find this filler took longer to dry completely than the packaging stated and would recommend leaving at least 24 hours for it to be fully cured. As the host of beloved and groundbreaking TV series including “This Old House” and “Bob Vila’s Home Again,” he popularized and became synonymous with “do-it-yourself” home improvement.

Although it is sold as a wood filler it is suitable for a range of other materials like plastic, fiberglass metal, and ceramics. TOUPRET TX110 Rapid-Drying Interior Filler for excellent strength, stable and smooth finish, and rapid drying. It’s also suitable to use on a wide range of substrates including, concrete, cellular concrete, cement, concrete block, brick, plaster, plasterboard, gypsum board, primed wood, stone, polystyrene, old painted substrates and fibreglass.

Best Filler for Walls and Ceilings in the UK [2023 Guide]

Brewers Quick Drying filler is a ready-mixed paste that’s ready to sand and paint after just 15 minutes. The simple tube design and screw on cap makes it easy to keep the filler from drying out, but we did notice that it’s quite hard to get the filler out of the tube in the first place. It comes in a walnut coloring and accepts paints, polishes, and all types of finishing materials easily. Resurfacers might require a float (a flat, wide tool meant to flatten masonry materials) to apply a smooth, even coat. This is particularly useful if you’re strapped for time as you can make good your surfaces in the morning and get your first and second coats on by the end of the day.These are multi-purpose fillers and can be used to fill the gaps and holes in walls, doors, or plastic surfaces.

Multi Purpose Fillers | Wall Filler | Screwfix

Minwax 21600000 High-Performance Wood Filler, available in multiple shades ad excellent for both interior and exterior use. The second problem you could face with a poor quality wall filler is that it flashes out as a different patch as the light falls on it. Whilst the Toupret TX110 is very quick drying with a dry time of just 3 hours, this combination blows that out of the water and can literally be ready to go in 10 minutes. The filler is of high quality and rarely flashes which means you don’t have to go to the extra effort and cost of spot priming the area that’s been filled.This filler is bombproof once set so you shouldn’t need to worry about having to carry out repairs in that specific area again. Red Devil adheres well, dries to a light concrete color, and won’t shrink or crack, resulting in a long-lasting fix. Not only do they look awful, but holes in the wall can lead to bigger holes and bigger problems if you don’t get them fixed ASAP. The Toupret interior filler is a high strength, top-quality wall filler that is an ideal choice for DIYers, professionals, or common people.