In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days.

As well as providing rapid set concrete for backfilling around manhole gullies and frames, which can also be used for surface repairs around street furniture. EASYJoint brush in paving grout can be used whatever the conditions are, it’s suitable to be used in wet and rainy weather. Aspects' EASYJoint Select range gives you four additional colours to choose from too - Bronze, Carbon, Tungsten and Jet Black.Therefore, the water used in applying the compound needs to be able to drain away and not be held in the joint.

The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better. If the joint has been 'struck' or 'tooled' this process may have to be repeated to achieve the desired finish. Water helps the user to sweep our paving compound around the patio, it also allows the compound to compact itself into the joints. Faster to use than traditional methods, simply wet the surface you are working on, create a slurry, sweep or squeegee in to place, and voila! Firstly, it provides better workability to the compound - allowing it to be swept across the paving more freely.

Without a strong foundation the paving will move and the EASYJoint mortar will crack between the paving slabs. Please note: Sensitive stone such as Black Limestone, Granite, Slate and polished Sandstone should all be sealed before the EASYJoint application, wet or dry.