If you are collecting timber products please collect at the time bookedi.e. 9am collection would be 9am > 9:45am, this helps us have the product ready for your slot and reduces customer congestion. Containing a high quantity of pigments and oils, Osmo wood finishes leave a stunning surface finish after just one or two coats, without the need for a primer or base coat. Wood species with a high content of natural wood extractives need to weather off before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner.

As with most DIY wood projects, there are a couple of things to keep in mind in terms of suitability, but anti slip, for the most part, is within anyone's reach. Untreated wood in its original form has a light, pale character from its natural ‘raw’ appearance. Sanded wood also has the same effect. Osmo Polyx®-Oil 3044 Raw is designed to retain this appearance by using a small amount of white pigments to neutralise the permanent ‘wet-look’ that develops after application of a clear finish. Resinous wood, such as Larch or Douglas Fir, needs to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Use a stiff nylon brush or soft cloth and apply a thin coat evenly and thoroughly along the wood grain. Coverage will vary depending on the type of wood, age and surface texture. Application & Maintenance AdviceWith easy application, no sanding is required during maintenance, simply apply a further coat! The resulting surface from Osmo Bangkirai Oilis tested to be resistant against liquids such as wine, beer, soft drinks, tea, fruit juice, milk and water etc, in accordance with German regulation standards. Application Osmo Teak-Oil 007 is a clear finish and therefore offers only little protection against UV radiation (greying).

Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. Pressure-impregnated wood, Massaranduba, Bangkirai, or Garapa need to weather off for at least 3 months. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.Osmo paints dry through oxidation - therefore require good ventilation to dry. Approximately 10-12 hours should be expected per coat. Shop item collections (treatments, fixings) these do not need to be pre-booked you can just turn up and pay in normal working hours. Resinous wood, such as Larch or Douglas Fir, need to weather off for at least 6 weeks to improve absorbency. Pressure impregnated wood and tropical species like Massaranduba, Bangkirai, Garapa, Iroko need to weather off for at least 3 months. Cedar requires a 3 month weathering period to improve absorbency. Wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).

Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces. Osmo Bangkirai Oil provides a very simple surface to clean. Simply use a moist cloth. Particularly difficult stains can be removed with Osmo Liquid Wax Cleaner.

Use stiff brush or a lint free cloth and apply thinly and evenly to the clean and dry wood surface along wood grain. Wood is a natural material, the cell structure, similar to our skin, can take on and release moisture, it breathes. To ensure that this exchange is not prevented we have created finishes especially suited to the character of the wood. Minimum Application Temperature - 10 degree Celsius, conditions must not be damp in the evenings and mornings, ideally apply in Spring to Autumn

Pressure impregnated wood, Massaranduba, Bangkirai or Garapa need to weather off for at least 3 months. Access must be suitable for lorries which will be 3.5 tonne 7.5 tonne or 14 tonne lorries (7.5 tonne being similar to average refuse collection lorry) After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply! For the following wood types, a weathering period is recommended. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application.

Also Recommended

Stir the contents of the tin thoroughly before and periodically during use and especially so with coloured oils This means you can achieve near to double the square meter coverage with just one tin compared to an ordinary finishing system. Bare wood species with a high content of natural wood extractives need to weather off (min. 4 weeks) before the initial treatment or be cleaned with Osmo Brush Cleaner and Thinner (degreaser).