A complete leak detection kit to help protect a basement area or other vulnerable area in the home such as laundry rooms, central heating systems or other water pipes, from unexpected water leaks. Including a LeakStop alarm panel, connection cables, 3 metre sensor tape and optional shutoff valve (sizes available between 1/2″ and 2″). To save the job of making your own, you can actually buy a pre-made water level from most DIY stores such as the one below. However it is likely that it will cost a bit more than making one yourself.

Our collections by our couriers are happening as usual. As it stands, delivery times are not being affected too much. Please be aware though that Royal Mail and other couriers are sometimes prioritising essential items so please bear with us if your delivery takes slightly longer than expected. Fresh water tank probe is supplied with a gasket and mounting nut for fitting to a 60mm diameter hole in your water tank and the wiring harness connecting the probe to the test panel is 4m long.

But what if you need to level items such as fence posts over a long distance, or indeed around corners, obstacles or other structures. If you don’t have funds for an expensive laser level or tool that can do this this is where the water level comes into its own. Read on to find out about this fantastic tool. What is a Water Level? For the latest information and advice on COVID-19, please refer to the latest updates by the UK Government. Before you can actually start levelling items with your water level you will first have to make it, if you’re not buying one. Follow the steps below to do so: We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. Yes, you can continue to return items as normal as long as you follow the government guidelines about leaving your house.

Fill the hose with water almost completely (leave columns of air about 5-10 cm long at the hose ends), while trying to prevent air bubbles from entering the hose. In case of water loss, refill and adjust the device. Colours on images on different devices may vary. We cannot guarantee an exact match of the colour to the product.Fresh water and waste tank level kit from CBE consisting of a tank test panel with coloured LED indicators, tank probes and wiring harness. This kit is ideal if you are retro-fitting a water tank or if you don’t have a level monitoring facility as part of your 12V control system. The LEDs light up when the test button is pressed and indicate FULL, 2/3, 1/3 and RESERVE. Step 2 – Prepare Water – Fill A suitable sized jug with water and add several drops of food colouring to to dye it. This will help to make it more visible in the tube The tube is then filled with water, except for a few inches at either end and they will both settle at the same level regardless of how close or far they are apart. The job of marking is best done between 2 people so that both ends can be marked, so bear this in mind. Note: If using with tanks of a shallower depth than 400mm, the probe can be cut down to suit as follows:

Put on the end plugs. They will prevent an outflow of water to the place of measurements. After reaching the measurement levels, remove the plugs.Making sure things are level before they are fixed is an essential job for both DIY’ers and trade professionals alike and normally this is done using a spirit or laser level. Step 3 – Fill Tube – Using a second pair of hands, have them hold both ends of the tube upright. Take the funnel and push it into one end of the tube and then pour the water from the container to fill it. Don’t fill all the way to the top, leave roughly 2 – 3 inches at either end. Once filled, hold them up together and they should both be at the same level Some insurance companies now offer discounts to those whos homes have water leak detection installed, particularly when insurance claims have been submitted for water damage before, so it’s worth mentioning to your insurance company if you have one fitted.