In Summary, Soft99 Fusso Coat is an astonishing wax and a real game changer. To get this sort of performance from a paste wax is incredible, even more incredible is the price point. Wax will last longer on your car if you can keep it out of the sun and away from moisture for 12 hours.

Once your wheels are clean and dry, begin applying the wax to the wheels in light, circular motions. Just like when applying the wax to the paintwork, allow the wax to dry to a haze and buff to a high shine with a fresh, clean microfibre cloth. Top tip: Once you’ve applied a wax to your wheels, do not use an acidic based wheel cleaner to clean your wheels the following week. Doing this will strip the wax from the wheels entirely rendering your hard work a week earlier wasted.

Unprecedented durability!

Use a tar remover. Follow instructions carefully. Some users have used a tar remover such as Gtechniq W7 Tar and Glue Remover for Cars. Reapply Fusso Coat. We had a lot of issues with the product on dark paint leaving a greasy, streaky shadowing in the paint that required polishing to remove and reapplication. For a while, we were actually reluctant to use the product because of this and as such got in touch with Nippon shine who recommended wetting the applicator and applying very thin coats. Whilst this cured the issue, it is not in the instructions and needs to be. We think this is the best wax a country mile at this price point. There are however plenty of excellent alternatives, such as As with any wax or sealant. durability is a key factor to consider. Logically, the more durable a wax is, the longer it’s going to last which in turn means you’ll be applying it less often. Durabiliy is one of Soft99 Fusso Coat Wax’ biggest strong points and the manufacturer claims protection of up to 12 months. That’s a pretty remarkable achievement from a conventional paste wax, you’d normally assosciate that sort of durability with a ceramic coating. Once fully cured, buff to a high shine with a fresh, clean microfiber cloth ensuring to turn the cloth frequently.

Whilst there are dedicated wheel sealants available for this very task, a good quality wax will do the job too. Fusso in Japanese simply means „fluorine”, main ingredient of the fluoropolymer bonding that Fusso utilises (PTFE – polytetrafluoroethylene). It’s the most slippery substance known to science! It prevents friction of mechanical elements, which is why it’s being used in prosthetic limbs or astronaut suits. Due to the extreme slipperiness of the PTFE polymer, covering a frying pan with it requires prior matting of the surface, followed by curing at high temperature (360°C). The biggest challenge was to transfer this process to the world of car caring. Soft99’s experts found a way to bond PTFE to the car’s paintwork by combining various fluoropolymers and substances, so the protective layer can bond with paintwork, glass and even fabrics. Foam the car using Bilt Hamber Auto Foam. Allow it to dwell for 5 minutes and rinse it off with the pressure washer. Leaves a lovely smooth finish on the paintwork and as it is a sealant, you can then top the product with a wax to enhance and protect the finish further. The big benefit to applying a car wax to your alloy wheels is that brake dust will clean off the surface much easier and therefore a strong, acidic based wheel cleaner isn’t required. A good car shampoo should do the job just fine. Can I layer Soft99 Fusso Coat Wax?Paint clean: The haze on the door was easily removed by hand using some Meguairs Ultimate Compound and a soft foam applicator. Application of Fusso Coat Q. How do you use a Fusso coat? Apply a very thin coat to a freshly washed and dried car. Buff off after 5 – 8 minutes.