Some of us use a mini circular saw only for cutting wood while others for metal, aluminium, or other materials. It is important to highlight that this specific model comes with 6 different blades, although it is considerably cheaper. It comes equipped with a battery-powered laser which projects a light along the line you wish to follow on a cut. That makes the cut far more accurate and easier. The max depth is 28.5 mm, a lot smaller compared to its Worx counterpart. Yet again, the laser is accurate and a friend in need and the depth control is easy to adjust.

What’s different about this Dremel mini circular saw is the fact it uses abrasive cutting technology. That means that the wheels are abrasive and not tooth bladed wheels like the rest. The kit includes 1 x DSM500 Multipurpose Carbide Cutting Wheel, 3 x DSM510 Metal and Plastic Cutting Wheels, one Dust extraction, 1 x Straight Edge Guide, 1x 2×4 cutting guide, 1x welcome DVD and last, but not least, a spacious storage case. Key specs – Weight: 3.37kg; Blade diameter: 85mm; Cutting depth at 90 degrees: 23mm; Cutting depth at 45 degrees: NA; No-load speed: 6,000rpm

As you can see, it comes with three attachments that will help you explore the variety of cutting of this the Dremel DSM20. Bevel adjustment: For the correct angle required for bevel cuts the bevel should be adjustable preferably to 45 degrees. We like the fact that this mini circular hand-held saw comes in a smart compact kit. The tool bag is included in the delivery. Plus, plunge cuts are also possible thanks to its adjustable cutting depth. You also get 12 months warranty on it.

However, let’s not take away its merit. Without a quality finish blade and an expert hand, a full-size circular saw tend to produce tearout when cutting thin pieces of trim or any other thin finish material. Therefore, depending on your needs, you might find out that you do need a mini circular saw after all. So, what is the best Mini Circular Saw? Weighting around 1.9 kilograms, it is extremely lightweight. It features a maximum cutting depth of 23 mm. Most circular saws offer the ability to set the cutting depth and the angle of a bevel by adjusting the saw’s angle relative to its baseplate guide. The depth of a cut will vary according to the angle – most saws will be able to cut more deeply when positioned at 90 degrees to the material, while angled cuts won’t be quite as deep. This will depend on what you’re planning to cut and how you’ll be using the circular saw. Larger blades will cut more deeply, but they can also be unwieldy. Not all blades will fit on all saws, but you can swap between blades depending on what you’re cutting. Blade capacity: Larger blades means more power and more depth. Normally the blades used in circular saws vary between 5 ½ to 71/4 inches. Most blades around 5 3/8 inch can comfortably cut through 2 inches of lumber. But remember, the bigger the blade the heavier the saw.

How to choose the best circular saw to make safe, straight and clean cuts

Just like the rest of the mini circular saws, this specific model is single-handed. It also benefits of an ergonomic design for an increased comfort and control. The best circular saws operate at the fastest speeds, measured in revolutions per minute (rpm). And the faster a circular sawblade can spin, the more control you’ll have over the cut and the cleaner it will be. You’ll generally find a correlation between the blade speed and the power rating of the tool, where bigger is almost always better.

As a rule of thumb, the more teeth a sawblade has, the neater the cut will be. However, low-powered circular saws often work best with blades which have bigger teeth. Left- or right-handed circular saws? Key specs – Weight: 3.37kg; Blade diameter: 165mm; Cutting depth at 90 degrees: 55mm; Cutting depth at 45 degrees: 38mm; No-load speed: 5,000rpmThis Einhell TC-CS 860 has a special steady aluminium soleplate, which offers good sliding properties for a firm, constant sawing. Yet again, it contains an integrated laser which comes as a support for an accurate execution of straight cuts. This tool also features an overload cut-out. We’ve tested the three main types of saws here – corded, cordless, and a mini circular saw – covering all-round useability, the accessories included, the noise when the saw is spinning freely and during a cut, and, of course, its ability to cut wood.