To minimise the power needed from the batteries, the Makita DSP600ZJ plunge saw comes with a special 165 mm diameter blade which is exceptionally thin. Unsurprisingly for a budget machine, the Einhell TE-PS 165 has no variable speed control to vary the speed of the blade, with the blade spinning at a single speed of 5200 rpm and limiting the plunge saw, to a small extent, in the applications in which it can be successfully used.

Einhell TE-PS 165 1200W Plunge Cut Saw (230V) - Machine Mart

A riving knife increases the safety on a saw, reducing the chances of a kickback by preventing the wood from pinching the blade after the cut. The Einhell plunge saw TE-PS 165 is a powerful all-rounder when precise cuts are to be made in a wide variety of materials. However, the plunge saw is a distinct saw type and has some unique abilities that the circular saw lacks, while in some of its overlapping capabilities, the plunge saw produces better results than the circular saw. The Vitrex MTCT600 Multi Saw has been designed with a locking clamp which firmly grips various materials in place for a more accurate cut, along with the dust extractor port for a cleaner working envi.Hand-in-hand with this track-using feature is the ability of the plunge saw to cut without chipping out the edge of the material. The maximum cutting depth of the Makita DSP600ZJ is an ample 56 mm when the blade is in its default perpendicular position and 40mm when angled at 45º.

Einhell Plunge Saws - Machine Mart

This is especially true when the plunge saw is to be used repeatedly over a short period of time or if it is to be used on a regular basis. No matter how big the challenge around sawing and cutting is, with the electric saws and cordless saws from Einhell, work in the garden or renovations on the house will succeed in no time at all. Plunge saws come in either a mains electricity-powered form, in which case their power specification is measured in Watts, or in a battery-powered form, where the voltage rating of the device is the unit of power measurement.For wood, panels and plastics: Thanks to a power rating of up to 1200W, the high-grade carbide blade powerfully cuts through materials with a cutting depth of up to 56 mm (at 90° without rail). However, in some situations, being able to go a few degrees past the 45° setting can also be useful when doing mitring work, and consequently some plunge saws have been designed to go beyond the 45° mark by two or three degrees. In addition, the track saw also has a soft start which takes it up to speed more gradually without the crudeness or safety risks associated with instantaneously jumping to full power when the trigger is pressed. In this review of plunge saws, we first look at how this specialised saw type is used and how it compares with the circular saw.

Einhell Expert TE-PS 165 Corded Plunge Cut Saw - 1200W - Wickes

That’s because the saw blade included with the Einhell TE-PS 165 quickly reveals its budget nature by making clean cuts hard to come by and by having a rather limited lifespan. The saw blade (Ø 165 mm) can cut into the workpiece up to 65 mm deep at 90° and 42 mm at 45° cutting angle setting. Unfortunately, however, it does not come with any batteries nor does it include the track on which the Makita DSP600ZJ runs, making the machine essentially inoperable without these accessories.This saw also features a powerful 1200W motor combined with blade lock for easy blade changes, and a vision panel to allow for a safe and clearer view of the cutting area. One of the questions most often asked with plunge saws is whether they are really necessary to own if one already has or plans to get their hands on what is often a cheaper circular saw.