le trésor de smaug n'est pas éclatant, mais plutôt terne. J'avais deux écrans qui diffusait le même films, celui de l'ordi portable (IPS) et ce 32 pouces: la différence m'a brisé le cœur. Information about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality.

Dimensions, weight and color Information about the dimensions and the weight of the specific model with and without stand as well as the colors, in which it is offered to the market. Width The pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen. So TLDR, the LG 32GN600-B is a flat 1440p VA 165 Hertz panel, having excellent low input lag, and 1 millisecond response with 5 Gray to Gray. The SDR colors are outstanding out of the box, and perfect after calibration. Supporting FreeSync Premium and working with G-Sync over DisplayPort only, the menu is snappy, and the 8 mm pixel to air is pretty good. For gaming, the Response Time or Overdrive setting of Faster does best at 165Hz, and Normal does best at 60 Hertz. Size class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches.Out of the box setup was good overall. The gamma was a tad low at 2.16 average but not by anything significant. We had a very good average colour temperature across all grey shades of 6494k (0% deviance) and also an excellent white point of 6508k basically spot on with our target. There were some moderate errors in the greyscale with 2.9 average measured, but overall considering this is a fairly budget gaming screen we were impressed by the setup.

The operating humidity shows the acceptable level of humidity, in which the display will function flawlessly. It sets a lower and an upper humidity level for safe operation and is measured in percentage. vu la taille, si vous aimez être près de l'écran, c'est un peu gênant qu'il soit plat. Les bords de l'écran sont un peu "décalés". Approximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen. The 32GN600 is aimed at gaming and so we put it through its paces with our usual range of tests. First of all, we wanted to establish which was the optimal overdrive mode (‘Response Time’ setting in the OSD). Pursuit camera photos capturing perceived motion clarity in the Faster and Fast response time modes at 165Hz refresh rateClarified text throughout as part of Test Bench 1.2, including adding text to the Console Compatibility boxes. We measured an 94.5% sRGB coverage which was pretty good, although we were a little disappointed to see it couldn’t quite cover the full space in this day and age. There is a bit of under-coverage in blue shades but it’s not major. There is also a small amount of over-coverage in green shades but again only minor, giving rise to that 97.8% relative coverage figure. The result of all this is that we had a good colour accuracy out of the box as well with an average dE of only 1.7 which was very good. There was some higher deviation in places, especially in the primary RGB shades where we had those minor differences in colour gamut under- and over-coverage mentioned before. All in all though this was a solid default setup with good gamma, colour temp, white point and colour accuracy for sRGB / SDR content. Calibration While HDR10 handling is advertised for this LG 32GN600-B, the reality is that monitors deliver SDR at the cd/m2 or nits the panel is rated for, and then boost to get the added brightness for HDR, usually by 100 nits or more. LG on the other hand, lowers overall brightness and shows full white just a bit above original brightness. This shows LG’s incompetence with HDR implementation in this monitor, so don’t buy this if one of the primary reasons is watching HDR. The net result of this is that the improvements you get normally in motion clarity from that extra 45Hz refresh rate are basically wiped out by the slower response times and their failure to keep up. We have captured some pursuit camera photos which show that actually the 120Hz mode probably looks a bit better overall in practice as there is none of this added smearing because the response times can’t keep up with the frame rate.