Set the clip in place, making sure the fastener rod applies upward pressure on the screen to keep it in position. This non-penetrating system is fast and easy to install, does not void warranties and can be removed for servicing. For outer corners, cut the solar panel pigeon proofing wire or weld mesh upwards from the bottom until the bend point and cover any gaps with a corner piece. For inner corners, cut the solar panel pigeon proofing wire or weld mesh upwards and secure any overlapped sections with cable ties. STEP 3: Slide the disk onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten the disk to panel edge. For this clip to work, the solar panel must have a minimum 20mm return lip on the underside of the frame.

This innovative system is designed specifically to keep feral pigeons from getting under solar arrays, protecting the roof, wiring, and equipment from damage. This non-penetrating system is fast and easy to install, and can be removed for service. Mesh Size: 25 mm X 12.5 mm (1″ X 1/2″) (Please note cheaper kits on the internet are sold with inch x inch mesh which is much weaker)

Problem Species

the presence of wildlife and debris can cause structural damage. For instance, rodents can chew through the wiring or debris can accumulate moisture, leading to potential corrosion on the roof. Our bird control pigeon proofing solar panel wire mesh or weld mesh installation clips are designed to securely attach solar panel pigeon proofing bird control wire mesh to your solar panels, providing a physical barrier that birds and other pests cannot pass through. The solar panel pigeon proofing wire or weld mesh nylon clips are made from high-quality materials and are easy to install, so you can protect your solar panels and roof in no time. This innovative clip is designed specifically to keep feral pigeons from getting under solar arrays, protecting the roof, wiring, and equipment from damage. This non-penetrating system is fast and easy to install. This Solar Panel Mesh Wire Clip is made from UV-stabilised Nylon and works to attach wire mesh to solar panels, helping to form a system designed to prevent all kinds of birds from accessing the underneath of rooftop solar arrays. As a result, you can easily protect the roof, wiring and equipment from any damage. Maximize the efficiency of your solar panels with our reliable and effective Bird Control Solar Panel Clips. Invest in protection that lasts and reap the benefits of clean, efficient solar power.

STEP 3: Slide the speed washer onto the shaft install the fastening nut by hand and tension as required.

It is recommended that fittings are spaced at every 0.45m intervals, which normally results in 2 clips on the short edge and 3 clips on the longer edge. Simply place the solar panel pigeon proofing wire or weld mesh nylon clips every 30-40cm along the solar panel frame and pull tight. Roll out the wire mesh or weld mesh and cut it into manageable lengths, then position the wire mesh or weld mesh in place, ensuring the fastening rod points upwards. Attach the fastening washer and join the next section of wire mesh or weld mesh with cable ties. Include a 75mm (3inch) overlap of the mesh when installing the next section, joint the mesh with stainless steel corner ties (sku- sscabletie) where the mesh overlaps and on the corner joints. Cut off any excess wire mesh or weld mesh screen and flush the clip assembly rod with the speed washer. Set the wire mesh screen in place with the fastener rod pointing upward to maintain downward pressure.

Solar panels are being installed on commercial and residential roofs across the UK. These arrays provide perfect harbourage for pigeons, homeowners are desperate for a solution that does not involve piercing or damaging the solar panels with mechanical fixings as this will void the panel warranty. This non-penetrating system is fast and easy to install and does not void warranties, please see installation images bellow. Our bird control solar panel pigeon proofing wire or weld mesh nylon clips are also durable and long-lasting. These bird control solar panel pigeon proofing wire or weld mesh nylon installation clips are able to withstand harsh weather conditions and provide reliable protection for your solar panels for years to come. STEP 3: Slide the speed washer onto the shaft of the clip assembly until snug. Make adjustments to the screen as necessary. Tighten speed washer to panel edge. These clips are easy to install and effectively deter pigeons from roosting or nesting on your panels. Crafted from durable, weather-resistant materials, they provide long-lasting protection.Systems can be installed around the side of the entire solar panel cluster and can be fixed with ease using solar mesh clips, which are highly recommended as a fast fitting option, or by using perforated pin bases and washes, however, this requires adhesive and time to set, so some installers may find this option not viable. Alternatively, the solar mesh can be installed with hex screws and washers directly into the side skirt. Still, users should be careful not to damage the solar panel or void any manufacturers warranty.

Solar mesh has explicitly been designed for use around the outer perimeter of installed solar panel systems to act as a physical barrier to prevent pest birds, including pigeons, starlings and sparrows, from gaining access to the underside of solar systems. The manufacturer recommends using 2 clips on the short edge and 3 clips on the long edge, spaced every 450mm. Always take appropriate safety precautions when working on a roof and on live electrical installations.

Follow No More Birds

This non-penetrating system is fast and easy to install, does not void warranties and can be removed for servicing, please see installation images bellow. The patent-pending plastic clips are not only UV stable but also gentle on anodised frames of solar panels, ensuring longevity. Installation is easy with the spacing of two clips per 450mm (18 inches) on shorter edges and three on longer ones, meaning the mesh is secure without drilling holes or harming the system. Constructed to accommodate the Solar Panel Mesh (WM132), the clips are almost invisible from ground level. Features & Benefits: Solar Panel Mesh Wire Clip The solar mesh is a heavy-duty and physical barrier that prevents a wide range of bird activity under solar panels, including roosting and nesting. The mesh size will usually prevent smaller birds than our solar spike range and can be effective for starlings and sparrows. Pestrol, recognizing the importance of safeguarding solar panels against these potential hazards, offers a highly effective solution in the form of PVC coated wire mesh. This wire mesh acts as a barrier, encasing the perimeter of the solar panels. Its primary function is twofold. Firstly, it restricts