The INCRA Flip Fence and Flip Shop Stop are popular upgrades for all INCRA Miter Gauges, and the Flip Fence's mounting T-slot also allows integrating this stop and fence system into sleds and miter saws. The Miter V27's compact protractor design works on applications typically not candidates for aftermarket gauges because of the narrow distance between the cutter and miter slot. INCRA's Miter Express offers any miter gauge owner a safe and accurate cross-cutting and mitering platform. Shown above with an optional INCRA Miter 1000SE mounted and ready, the Express features 2 embedded T-Slot channels to secure the included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable for mounting your own custom Jigs and Fixtures. Perfect for the INCRA V27 and V120 miter gauges and upgrades the Miter 1000 to Miter the 1000SE.The Flip Fence is designed to give you outstanding fence performance and rigidity. Manufactured by INCRA from aircraft-grade aluminium extrusions, this fence profile is designed to coordinate perfectly with the INCRA Flip Shop Stop. As shown, the same INCRA HoldDown Clamp also keeps your fingers comfortably away from the blade when cutting workpieces that are too small to safely hold by hand.

Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. The advantages are simple: The Miter Express doubles your miter gauge's capacity for cutting large panels, it offers more hold down options for greater safety when cutting small parts, and it provides better control overall because the lumber is carried through the blade instead of pushed across the saw. Assembly is straightforward and only took about 3 1/2 minutes. The Wood River gauge features a steel protractor head with 13 positive stops, a steel miter bar and an aluminum non-telescoping fence with a flip-stop. At this price range, a flip-stop is an unexpected luxury. Unfortunately, if you want a sacrificial fence on your miter gauge, like I do, the stop becomes unusable. The stop itself did show some deflection under pressure. There’s no built-in way to accommodate a sacrificial fence either, so you’ll need double sided tape for that. The Miter V27's adjustable miter bar will fit standard square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.760". The sled can be set up on either the left side or right side of the blade, and a renewable Drop Panel provides zero clearance tearout control on both sides of the blade.Six expansion disks adjust both sides of the bar for ZERO side play, low-friction travel on all table saws with standard miter gauge channels, including Delta, The V120's adjustable miter bar will fit square-sided miter slots 3/4" wide, 3/8" deep, and either with or without a 15/16" wide T-slot at the bottom. The miter bar's adjustment range accommodates slot widths between 0.740" to 0.760". The Miter 1000's adjustable miter bar will fit square-sided miter slots measuring 3/4" wide, 3/8" deep, and with or without a 15/16" T-slot at the bottom. The miter bar's adjustment range accommodates actual slot widths between 0.740" and 0.765".

The 3/4" x 3/8" steel miter bar features up to six independent nylon expansion rings to ensure a perfect fit with the slot in your saw. A removable steel T-Clip helps to keep the miter gauge on your saw when fully retracted for wide crosscuts. Assembly took about 15 minutes but most of that time was spent fiddling with the darn stop. This is one of those parts you wish they included pre-assembled. The Kreg Precision Miter Gauge features an aluminum protractor head, aluminum fence, and an aluminum miter bar. That’s a bold choice for a miter bar as I can see it being a potential weak point in the design, especially at a length of 24” (the longest you’ll find on the market). The gauge can rotate 50 degrees in both directions and has a resolution of 1/10 of a degree thanks to a high visibility vernier scale. It has 9 positive stops that are engaged with a brass pin, though this is an unfortunate design choice as the pin is not fixed to the gauge and if you should happen to turn the gauge upside down, the pin falls out. I also noticed a little play at each detent, but you can overcome it by putting a good amount of pressure down on the pin and then tightening the protractor head.Don't let the small size fool you! The NEW Miter V120 puts high-resolution, repeatable accuracy within the budget of every woodworkers. An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.