The card I’m looking at requires 2 x 8-PIN connectors. I guess I could get a 2 x 6-Pin to 8-Pin Y cable, and also a 2 x Molex to 8-PIN Y cable, this should according to my calcs give me 282W of power which exceeds the 250W requirement of the card, however I don’t fully understand how the dual rail thing works and the fact that each rail is limited to 18A. and I don’t know if I understood correctly but this schema https://i.imgur.com/Dv9738Z.png (which you posted earlier in comments) says in general that 6pin and 8 pin are the same – both have 3 current wires, sense A and B can be ommited, and only difference is in one additional grounding pin).

The only reason I care is I have a few Dell graphic workstations that came with dual 6 pin that powered graphics cards a bit beyond office specs. I ran a 1080 in one (no issues) had to to a 8 pint (of the PS pcb board (they are modular and have no wires, more like a server PS that you just slide in and it connects for a PCB edge connector. You can have 2 x molex -> pci-e 8pin ... each molex has only one 12v wire, and each molex is rated for 5A of current, so in theory your adapter would be good for 2 wires x 5A x 12v = 120 watts.The iPad Pro, released in 2015, features the first Lightning connector supporting USB 3.0 host. [9] The only accessory released with USB 3.0 support is the Lightning to USB 3 Camera Adapter. [10] Transition to USB-C [ edit ] You will find the PCIe slot closer to your computer’s case/IO shield. Any typical motherboard of a PSU has twenty lanes of PCIe, so you can easily spot them. If you have an existing GPU, you need to unplug the connectors and take them out by unscrewing them. On November 25, 2012, Apple acquired the "Lightning" trademark in Europe from Harley-Davidson. Apple was given a partial transfer of the Lightning trademark, suggesting that Harley-Davidson likely retained the rights to use the name for motorcycle-related products. [7] [8] In conclusion, these are the differences that you should know about 6-pin, 8-pin, and 12-pin connectors. You have also learned about some easy ways to achieve connections with your GPU, along with the differences. But along with that, you should also assume the consequences you can face for any connection.

Different Apple MFI Lightning Connector Chips: C48/C89/C91/C94/C100/C101". bytecable.com . Retrieved August 3, 2023.a) since I am getting a molex to 6 pin connector, my understanding is that I need to provide power to the graphics card which is 12 volts , I am connecting with the adapter but even if I connect it to the 4 pin atx in my mobo I would be getting 12 volts. Since I am not really thorough with current fundamentals, I am struggling to understand what is 6.25A. well if the card is under powered(card wont get any harm), the card will get harm only if its overpowered. This is my understanding