To enhance compatibility with the ever-increasing range of lighting options now available to customers, V-Pro dimmers are programmable to offer a choice of dimming modes. In addition, users can set the minimum load level for the dimmer to optimise the dimming range of a particular lighting load.

Optimise Performance:To enhance compatibility with the ever-increasing range of lighting options now available to customers, V-Pro dimmers are programmable to offer a choice of dimming modes. In addition, users can set the minimum load level for the dimmer to optimise the dimming range of a particular lighting load. Additional features refine performance to providea stable light output across all brightness levels, both when the lights areswitched on and during operation.The V-Pro series also features a soft-start feature to improve the life span of both the LED lamps and the dimmer. Contains trailing edge V-Pro dimming technology which can be reprogrammed to emulate leading edge mode but isn't TRIAC (see V-COM for a true TRIAC dimmer switch). Users can set the minimum and maximum load level for the dimmer to optimise the dimming range of a particular lighting load. Here's an example. In your lounge there are two light fittings both with 3 x 60W light bulbs currently controlled by a single switch. You want to buy a dimmer to replace the switch. In your local DIY shop there are two dimmers available, one with a maximum rating of 250W and the other 400W. In this case the total lighting load is 2 x 3 x 60W = 360W. Therefore the 250W dimmer would not be suitable; you would need to choose the 400W instead. Our V-Pro Multi-Pointseries comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro Multi-Pointdimmers offer superior dimming technology to deliver the best possible dimming performance for a given load.

As we all know children love to play with light switches especially dimmers. So you can prevent the dimmer accidentally going into programming mode by Some other lighting loads, including some types of LED lights, perform best with leading-edge control. Some LED lamps do not show the programming steps as clearly as others. In this case swap for a different make of LED lamp or change to a traditional lamp for programming.

To help with this process Varilight have produced an excellent video which is below Written Instructions If the dimmer is being used with certain brands of transformer (used with low voltage lighting) can prevent programming. For best performance of any Varilight dimmer with low voltage lighting, choose Varilight transformers. To return the dimmer to MODE 1, follow the same procedure again. The light will flash once. This will show the dimmer has returned to MODE 1.After 3 seconds the dimmer will notice that you have stopped adjusting the brightness and set the brightness level as the new maximum. way or 2 way operation. Allows dimming from 1 side of the room and switching from another. If 2 way dimming is required then see the Varilight Eclique range were a master and slave touch dimmer can be used.