Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. TheKreg® Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. TheKreg® Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly.

Kreg, one of the world’s leading jig makers, does not disappoint with this high-quality precision cabinet door hinge jig. It is made from tough glass-filled nylon and designed to cut holes for standard 35mm cabinet hinges (often called Euro hinges). Buying a door jig is the easy option, but with care, it is possible to make your own. In fact, for cabinet doors, a jig isn’t strictly necessary. If you can measure and mark accurately, hold the drill vertically, and judge the depth of a hole, then a Forstner bit of the appropriate diameter to match the hinge is all that is required. Owners of pillar drills will find the task easier, but a portable drill and a steady hand can get the job done. Calling the Everbilt template a cabinet hinge jig is a bit of a stretch, but as a low-cost way to mark out cabinet hinge positions, it works fine. It also includes the necessary Forstner drill bit, though not the 1/16-inch bit for hinge retaining screws.How the hinge jig is set up will depend on the type of jig. Some door jigs clamp to the side of the door, while others use locating pins and screws. Cabinet jigs usually need to be held in place using ordinary woodworking clamps, which will not be included. To ensure accuracy, it is important to follow the instructions that come with the jig. Q. How many hinges should a heavy door have? The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. Most door hinge jigs are made from either injection-molded plastic or glass-reinforced plastic—also known as glass-reinforced nylon or fiberglass. The first is cheaper to produce, while the latter is tougher. The jig can flex if too much pressure is applied when routing, so care is needed. Unfortunately, the included router bit is not very good and soon loses sharpness. Those with numerous doors to hang may wish to invest in a better cutter.

The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called "Euro hinges") using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly. A router bit is required with full-size door hinge jigs, and one is often included. Shank size will be either ¼ inch or ½ inch. Neither is better than the other, but the size will determine the kind of router used. Some ½-inch routers include a ¼-inch collet as an option, whereas ¼-inch routers cannot use ½-inch bits. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig.The guide above will prove useful in finding the right jig for full-size interior and exterior doors as well as cabinet doors. Those who want more info or clarification about these tools may well find it below in answers to some common questions about door hinge jigs. Q. Is there a tool to cut out door hinges? Cabinet hinge jigs almost always include the Forstner bit required to drill the flat-bottomed hole for the main body of the hinge. They may also include a smaller drill for the retaining screws. TheKreg® Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, theKreg® Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. The Everbilt jig is basically an L-shaped piece of transparent plastic that is held against the door edge. Holes allow pencil marks to be made for the hinge and retaining screws. The jig is then put aside and the relevant holes drilled. Any adjustment for offset will need to be done manually, which could lead to errors creeping in. In addition to the 35mm offset cams, a pair of 26mm cams is also provided. These allow the BI-DTool jig to be used for smaller hinges, though the required cutter is not included. Unlike the Kreg, there is no scale on the edge to help with alignment. Additional clamps are required to hold the jig in position, but that’s typical of this kind of jig. A 1/16-inch drill is provided for retaining screw holes, though care is needed as this can easily cut into the plastic guides on the jig, thus reducing their accuracy.