Set the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion. Using the homeassistant.update_entity service for an entity belonging to a battery-powered device is not possible because most of the time these devices are sleeping (are offline). Shelly generation 2 devices running firmware 0.12 or later can act as a Bluetooth proxy for advertisements. Active or passive listening can be enabled in the options flow. Options

What’s really cool about this sensor is the custom options. Shelly Motion can detect individual motions every 3 seconds. Obviously, this more than anyone would ever need, so you can customise the following settings: If you think your Shelly devices are working correctly and don’t want to change your network/configuration, you can ignore the repair issue. Still, you must know you are giving up the best experience of using first-generation Shelly devices with Home Assistant. It’s not just a PIR sensor. Shelly Motion comes with an array of sensors capable of measuring motion, vibration and luminosity. Thanks to these customisations, you can use this PIR sensor to trigger lights or dial it in, to work with alarm systems without running into false positives. PIR If you can’t find the CoIoT peer settings in the device’s web panel, it’s probably using an ancient firmware version, and you should update it to the current one. When motion is detected in any of the conditions below, the sensor will send a separate command when it disappears. The sensor will transmit a new movement after the blind time has elapsed after the last movement.Input the number of consecutive movements (from 1 to 4) for the sensor to detect before reporting motion.

It’s pretty sensitive at low settings, and I could imagine this can be activated by passing lorries outside if your walls are prone to movement like this. With a bit of trial and error, you could use this to create an earthquake alarm, in case you sleep as deep as me. Shelly app Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Shelly Europe Ltd. For more information, please visit: https://shelly-api-docs.shelly.cloud/#shelly-family-overview. If only the device name is set, and the device has multiple channels, the channel number will be appended to the entity name (e.g., Channel 2). The main sensor of the Shelly Motion2 – a highly customisable motion sensor capable of detecting motion up to 9m – is enough to cover most of the household areas. The minimum timeout for the motion is 1min, which may not be as impressive as a 1-sec timeout on ZigBee-based Aqara Motion P1, but the device comes with interesting trigger options.If the Input Mode of the switch connected to the device is set to Button, the integration creates an event entity for this switch. You can use this entity in your automations. Events

This document contains important technical and safety information about the device, its safety use and installation. The first will allow specifying a temperature, the second instead of a percentage of the valve position. Real time response - detects motion in less than 200 ms and immediately triggers action to other devicesGreen brief flash: Unreported motion detection (the Device is not connected, or motion detection is disabled). If the BUTTON TYPE of the switch connected to the device is set to momentary or detached switch, the integration creates an event entity for this switch. You can use this entity in your automations. Event entities (generation 2) Unfortunately, there is no log of the past motion triggers so if you want to keep a record of this, you will have to use associated webhooks or MQTT to store it yourself. As a temperature sensor In case device name and channel names are not set, the entity name will be generated by the Device Type, Device ID and Channel Number.

Home Assistant will display a repair issue for the Shelly device if push updates from this device do not reach the Home Assistant server.These triggers can be used to narrow down other actions so they apply only at night or at certain light levels. Especially useful for changing the behaviour of the bulbs at twilight and at night. There is no historical data associated with this measurement, so if you want to have a record, you will need to use webhooks or MQTT to get that info out of your Shelly Motion2. As a vibration sensor Brightness information is provided in lux units and ranges from 0 to 100000 and provides 3 light levels available as triggers: dark, twilight, and bright. These can be also defined in the sensor’s settings so if you don’t like the specific values for each trigger you can change the ranges.