REW: miniDSP worked along with John Mulcahy to develop even greater compatibility for the UMIK-1 inside REW! With the latest beta release of REW (v5.01 and up), the UMIK-1 is automatically recognized by the software and prompted for use when REW is started with the microphone plugged in. The UMIK-1 is an omni-directional USB measurement microphone providing Plug & Play acoustic measurement. In this application note, we will show you how to integrate a subwoofer with your existing loudspeakers by using a miniDSP 2x4 HD. You can use an existing preamp, or replace a preamp and a DAC with the miniDSP 2x4 HD. (In the latter case, you will need to program a remote control to adjust volume in the miniDSP 2x4 HD.) As a standard USB audio microphone, UMIK-2 is compatible with any software. The following proven platforms with plug&play integration. REW: miniDSP once agains partners with John Mulcahy to develop even greater compatibility for the UMIK-2 inside REW! With the latest REW version (Beta , the UMIK-2 is automatically recognized by the software and prompted for use when REW is started with the microphone plugged in.

NOTE: if you can't see the miniDSP ambiMIK-1 VST from this list, it's most likely because you didn't copy over the VST files in the correct folder as it will search the plugin in the following folders. Make sure to copy the VST files into one of these folders. miniDSP assembled some very comprehensive steps by steps for the UMIK-1 for all sorts of applications. Please make sure to start reading our application notes to be up and running in no time! Note: the distortion components may include distortion from the microphone, so take care in interpreting these results. The UMIK-1 is an Omni-directional USB measurement microphone providing plug-and-play acoustic measurement. From speaker and room acoustic measurement to recording, this microphone provides low noise and accurate results you can rely on. Forget about driver installation, OS compatibility and un-calibrated mics. The UMIK-1 is a USB Audio class 1 device automatically recognized by Windows, Mac and Linux operating systems, and iPad with camera connection kit. It is provided with a unique calibration file based on the serial number to insure an accurate measurement. Combined with our recommended acoustic measurement software, it is the perfect match for a plug-and-play measurement system.

Roon Ready Audiophile Streamer + Room Correction

DSP equalization can't change reverberation time. Heavy drapes and carpets will reduce reverberation time, but if you need to go further, then dedicated acoustic treatment may be required.

Tap on Sig Gen at the bottom of the screen. You can experiment with the different types of test signal here. For now, set it as shown below, adjusting the volume so that it plays through the system at a comfortable level. Ensure that the signal generator is enabled at the top right, and turn signal generation on and off with Play/Pause button (next to the Headphones label at the top left. Adjust the level with the iPad volume control and the Noise Amplitude slider, and use the Noise Pan control to send output to only one speaker.

Multichannel DSP for Audiophiles

Please note that OBS is third-party software. miniDSP is not able to directly provide support for this software. For questions or issues specifically related to OBS, please refer to the OBS Forum and its online tutorials. The upgraded on-board 400 MHz Analog Devices SHARC processor also ena-bles substantial processing upgrades previously available only on more ex-pensive platforms, such as 96 kHz internal processing for true high-resolution audio capability and assignable FIR filter taps for sophisticated equalization, crossover, and room correction capabilities. All to be accessed and programmed with miniDSP’s easy-to-use interface software. Mount the UMIK-1 into the small stand supplied with it, or if you like, you can use any other microphone stand. To connect the UMIK-1 to your Apple iPad, you will need either the Lightning to USB adapter (for newer iPads with an 8-pin Lightning connector) or the Camera Connection Kit (for older iPads with a 30-pin connector). This photo shows an iPad mini connected to the UMIK-1 via the Lightning adapter: Asynchronous USB Audio Class 2 Bidirectional streaming with ASIO drivers under Windows, driverless under MAC OSx The UMIK-2 is of course fully compatible with REW (Room EQ Wizard) and Dirac Live (version 3 and later). Driverless operation with macOS, Linux, Android and iOS, and a supplied ASIO driver for Windows ensure simple integration into many other measurement and recording applications. With the UMIK-2, miniDSP once agains stretch the limits of affordable acoustic measurement gear. Let the measurement fun begin! Features