For 160 MHz channels in 5 GHz, you need to utilize DFS space. There are three non-overlapping channels available: This setting controls whether mDNS is enabled on the wired network, and any wireless networks that rely on it. Multicast DNS is mostly used to discover devices like a Chromecast or printer. If you have AirPlay, Chromecast, Sonos, Bonjour, or similar devices and you want to be able to discover them on other networks, Multicast DNS should be enabled. IGMP Snooping allows a layer 3 UniFi device to query for multicast clients, and only send multicast traffic to the clients that should receive it. Basically I use my computer and my smart tv hooked up right now only to my edgerouter 4 max this product

If the access point is still connected and online in the UniFi Network controller, then we can also reset the AP from within the controller. The advantage of this method is that it also removes the access point from the UniFi Controller.You can convert standard WiFi into a Hotspot Portal by navigating to UniFi Network > Settings > WiFi> Select a WiFi instance > Enable Hotspot Portal. Configuring a Hotspot Would you have any recommendations? Should I open firewall settings between AP and computer with controller maybe? All good thoughts are welcome! Band steering can be set to off, prefer 5 GHz, and balanced. With off, the AP doesn’t do anytime to encourage clients to join 5 GHz, and clients may prefer to join the 2.4 GHz radio due to it having longer range and a higher RSSI. Those clients may be closer to another AP and a stronger 5 GHz radio, but a lot of times the Wi-Fi client device will stay connected to the 2.4 GHz radio. Setting band steering to prefer 5 GHz can sometimes help with that. It can also cause issues with some IoT or 2.4 GHz-only devices, so balanced is sometimes a safer choice. This is one more knob to turn when you’re having issues with roaming. IP Settings and Miscellaneous

By default, guests connected to your Hotspot Portal will be isolated from all other networks except the one they are assigned to. This can be modified by enabling Pre-Authorization Allowances. For high-density networks where careful channel planning is important, manual selection is best. For most networks, especially with less experienced administrators, auto channel optimization usually leads to good results. Wi-Fi Speed Limit allows you to restrict the amount of bandwidth available for clients connected to the network.

Ubiquiti UniFi Access Points Advice

One UniFied Network: Option to create one large wireless network across multiple APs that lets users seamlessly roam. Open TCP Port 8080 and UDP Port 10001 locally (LAN) on all gateways, firewalls, and antivirus software. Because each access point is so unique, it’s important to choose a model that best suits your needs.

This setting controls how often an AP changes the GTK, or Group Temporal Key. The GTK is a cryptographic key that is used to encrypt all broadcast and multicast traffic between APs and clients. Is there a way to set up a UAP(stand-alone) without a controller, on a PC. I could only find a way to do it with a smartphone. Transmit Power allows you to set TX power for your radios to low, medium, high, auto, or a custom value. The actual dBm values for low, medium, and high are based on the AP model and what they are capable of.The system was set up and is controlled by a local ISP, who we would like to get away from. We have recently had 900+ mbps FTTP installed, onto which we would like to transfer all of our existing network. Physically that is not a problem, and it is not a problem to physically reach all switches, APs and routerboards. The great thing about the Unifi range is that you get enterprise-class wifi for an affordable price. What you also will discover is that they are super easy to set up and manage. And if you like statics, you will get some great insights into your network as well. Which Unifi Access Point Should You Choose?