The unit has three switches marked Locate, Test and Silence to control the features described above The use of the remote control switch increases the flexibility and ease of use of these alarms by allowing the alarms to be located, silences and tested remotely.

Carries the CE mark to indicate conformance to Low Voltage and Electromagnetic Compatibility Directives. All alarms on the system will sound. This is the equivalent of pressing the test button on each individual alarm Wall mounted for ease of use can be fixed with surface mount box supplied, or will fit a standard recessed box (not supplied).

If You Have An Item To Return

Compiles with electrical safety requirements: EN61000-6-1:2007 Et EN61000-6-2:2005 (EMC Directive) and EN60065:2001 + A12:2011 (Low voltage directive) Up to 4 x EI1529RC switches may be installed together with a maximum of 20 x 2100, 160RC and 260 Series smoke, heat or carbon monoxide alarms

Ideal for elderly or vulnerable users, the wall-mounted switch tests, locates or silences your interconnected smoke alarms from an easily accesible low-level position. This item is guaranteed for five years. This remote control switch can only be interconnected via hardwire to communicate with compatible Ei Electronics Alarms and accessories. Up to 12 devices can be interconnected.Suitable for siting at any convenient point in the property. Up to 4 x Ei1529RC switches can be installed in a hardwired system along with a maximum of 16 x 3000, 2110e, 160e or 140RC Series smoke and heat alarms or 261ENRC Carbon Monoxide alarms. Silence Switch: Allows the user to silence all interconnected Alarms at once for 10 minutes in case of false alarm.