When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency. With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs. The thermostat is designed to be versatile and compatible with a wide range of heating systems, including combi boilers, system boilers, and electric heating systems. It can be used as a wired or wireless thermostat, depending on the user's preference and the specific installation requirements. To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open.

The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programmingIn addition to its heating control functions, the Digistat+3 has a built-in frost protection feature that ensures the temperature never drops below a certain threshold, preventing freezing and potential damage to the heating system. Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly.

When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost? Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend.