Additionally, the light and smooth surface of the melamine sheet makes it easy to mark up for cutting or sanding down, and it can be cut into various shapes and forms with ease using an electric saw, router, or handsaw. Please note that when cutting MDF, appropriate protection must be worn due to the dust particles MDF can create. To screw into MDF you will require specific screws to prevent splitting. We recommend using screws that are purposely made for MDF as generic screws may damage the sheeting. Does MDF warp?

Melamine is difficult to cleanly cut with most DIY tools, giving at best, one clean face, and one chipped side. Using a jigsaw will potentially damage both faces due to the sawing motion of the jigsaw. If you intend to cut melamine, we recommend using a circular saw. HPL and Trespa® sheets are making a slow, but steady, advance on the interior design business. Many hygienic areas already have HPL walls and worktops, for example: laboratories, hospitals and institutional kitchens. Even in sanitary facilities, HPL sheets are the number one choice. Many public bathrooms, dressing rooms and swimming pools have HPL surfaces. It is safe to say that HPL / Trespa® is implemented in a diverse range of sectors and still it is possible to make each area look unique. The wide range of colours and designs leave room for personal taste and an original twist. HPL / Trespa® Production method Due to the small strands that construct the sheet, our melamine board is ideal for use in environments where efficiency in construction is necessary as it can easily be lifted and maneuvered. MalleableMelamine is a type of laminated wood. The lamination is applied to the outer surfaces of melamine that can be used to match it to any style of kitchen, including some laminates that resemble wood grain. Melamine is made using particles of wood, paper and resin, which are all combined under extreme pressure. Is melamine MDF waterproof? Boasting a consistently smooth white surface, melamine sheets are perfect to use as a furniture board. They are commonly used for workbenches, wipe boards, white melamine shelving, and cabinetry as they are easily customisable while featuring scratch resistance, and water resistance aiding the strength of the MDF core. As a result of this, our standard grade MDF is easy to fabricate, drill, or affix with screws, nails, or glues.

Our melamine-faced MDF is easily machinable and can be installed without fuss, leaving projects with a smart and professional finish. Applications & Uses of White MDF BoardWhite melamine board 18mm is used for a number of purposes including making kitchen cabinet, shelving, cupboards, wall units, wardrobes and furniture and much more. Due to its smooth and stable surface this MDF is also used for decorative wood or laminate veneers. Melamine is waterproof, shatter and scratch-resistant, protecting any laminated MDF boards in the same way. Be careful however of the edges as those will not have any melamine protection. How do you clean melamine? Our melamine boards are made up of a clean white melamine veneer that is bonded to our standard MDF board. The core of the board is our MDF with 0.5mm melamine laminate sheets applied to both faces. The result of this is a sleek, modern, and clean-looking melamine MDF sheet. We are able to provide melamine MDF in sizes ranging from 6mm to 18mm . White furnishings are timeless since they go with both modern and traditional home decor. White laminate furniture gives owners the freedom to experiment with other hues in the interior design to highlight the desired style. Any room seems upscale with a work desk or coffee table covered with a solid and rich white laminate sheet. Melamine-faced MDF provides a flat, clean, white outward face to allow for a professional finish. It can easily be used to replicate the look and feel of solid wood alternatives at a more affordable price.