Made of aluminum, it’s light enough (303g) to be carried around and it folds up for added portability points. The iPad can be tilted on the stand for the best viewing angles. Ports: USB-C (to iPad), USB-C PD (5Gbps/91W), 2x USB-A (5Gbps), HDMI, SD and microSD card readers, 3.5mm audio

The best case would be that the phone has massively defensive charging circuitry, but I'd be surprised if it could handle 20V for the smaller components used in phones. Most likely it would burn out the charger circuit. Here we have tested and reviewed the premium USB-C hubs and adapters. There are many much cheaper versions out there, but we recommend these for quality and robustness. Which extra ports do you need In the same family, Satechi also offers the Pro Hub Mini (the same as the Max but without the HDMI port) and the Pro Hub Slim (which swaps the Ethernet port for an extra USB-A port, and boasts 10GBps USB-A and USB-C ports compared to the Mac and Mini’s 5Gbps). If you don’t need wired Internet access, the Pro Hub Slim edges out the Pro Hub Max. If you don’t need more than one external screen or you want to save the USB4 for passthrough charging only, consider the Pro Hub Mini or the Plugable 5-in-1 USB-C Hub reviewed below.. Anker’s hub was among the fastest we tested to deliver data under load, including simultaneous data transfer between USB-A ports while the SD ports were active. The hub offers an 18-month warranty, and it even ships with a carrying pouch. Does such a splitter exist? And, indeed, can such a splitter exist, or is this a limitation in the technology (i.e., in terms of power management)?

Pros

Yes, it’s possible to simultaneously use both ends of the USB splitter without any issues, but the transmission speed can decrease compared to when only using one end. How often should I change my USB splitter?

Hyper also sells a 5-in-1 iMac USB Hub with two USB-C (5Gbps) and three USB-A (5Gbps and one that charges at 7.5W). Whilst USB-C cables are generally designed for higher current I still advise using short power cable to the Pi where possible to reduce voltage drop.This Splitter, Hub, or aka OTG Adapter must be able to charge the Quest at full speed, I'm currently using a J5 Create Hub, And sadly it's not able to keep up with the Quest's Power Draw... If your smartphone is compatible, you can charge your phone up to 80% in just 35 minutes. To fast-charge an iPhone, you need a minimum of 18W and USB-C, so look for extra USB-C slots, which are more capable than USB-A. The Anker PowerExpand is special as it offers an HDMI port that supports 4K 60Hz resolutions, where most are limited to 4K 30Hz. For 4K 60Hz resolution, your device must support DP 1.4. This includes MacBook Air (from 2020), MacBook Pro 15in (from 2018), MacBook Pro 16in (from 2019) and iPad Pro (from 2018). I just need something that provides a USB A or C Data+Power Connection and a USB C Power Pass through Connection... Five of the ports on this hub that clamps to the underside of the iMac are front-facing ports for easy access to memory cards, USB storage, or storage cards. There are two USB-C ports and one USB-A port (all rated at a speedy 10GBps). The USB-A port can charge a phone at 7.5W.