Ensure the paint is clean and dry before applying the product. If desired, correct your car’s paint before applying it, but this is not necessary for the product to fully bond to the paint. Spray onto a microfibre or foam applicator. Apply to the surface in a crisscross pattern to ensure complete coverage. After application, allow the product to cure and haze white, then buff off with a clean dry microfibre towel. After buffing, no cure time is needed before being introduced to water. Not very much at all. On one door I made half a dozen sprays on my applicator pad and heavily coated the door with far more product than is needed. Left it to haze for a couple of minutes, buffed off and it was absolutely fine. You don’t have to be a pro detailer to reap the benefits of 303 Graphene Nano Spray Coating. The product is engineered with simplicity in mind so everyday car-lovers can experience superior durability. By lowering the surface temperature of treated areas, water has more difficulty drying on the surface. This process causes hard water spots to become embedded in the clear coat. The product’s versatility allows it to be applied to a vehicle’s paint, glass, wheels, and plastic trim. The coating is safe to apply on all of these surfaces, providing up to one full year of protection following treatment. Using a graphene oxide formula, the agent creates a strong bond with exterior surfaces for an unprecedented level of protection. I found that one spray was enough to do most panels, the only exceptions being 2 sprays for the bonnet and 2 sprays for each half of the roof. In total I used 14 sprays on a fairly large car. I don't know exactly how much product was used but having taken the lid off to have a look it really doesn't seem to have used much. As a very rough estimate I'd say you're looking at 10-15 vehicles from one bottle which in my eyes would make it very good value. Sweating - Beads of product coagulating on the surface After you apply and spread the product over the surface, within a few seconds the product forms tiny beads called sweating.

Whether you're working on something cool like the old 2-door Ford in this review or whatever it is you own and drive - there's something to be said for driving and being seen in a clean, well maintained vehicle. You definitely don't need to wait 5 mins. You'll be in a world of hurt (muscles!) Buff off after you see dark colored little beads. If you go too soon it'll end up looking fine but you might remove too much of the product and it doesn't do much. I have not found that it smears, and it actually finishes very well. But I just fear that most of it ends up on my towel. You'll feel when you found the sweet spot of time elapsed. It's grabby as you remove but not too much, and looks fantastic after.

IS THERE ANY CURING TIME NEEDED BEFORE THE PRODUCT IS INTRODUCED TO THE ELEMENTS?

No, this is not necessary. 303® Graphene Nano Spray Coating™ can be safely layered on top of an existing coating and will not negatively affect the coating underneath it, it will only enhance it. CAN 303® GRAPHENE NANO SPRAY COATING™ BE LAYERED ON TOP OF ITSELF? DOES THIS PROVIDE ANY ADDITIONAL BENEFITS?

Ensure vehicle is clean and dry before application. For best results decontaminate and polish your vehicle. Spray product on to a microfibre towel or foam applicator and apply to the surface in a criss-cross pattern to ensure even coverage. After application, allow the product to cure and haze white and then buff off any residue with a clean microfibre towel. After buffing, no additional cure time is needed before being introduced to water.

IS THERE ANY RECOMMENDED MAINTENANCE FOR 303® GRAPHENE NANO SPRAY COATING™?

After hearing so many people including various influencers and personalities dismiss graphene as dud product - I'll just say this... I always give priority to a chemist over a talking head. And I say this with all due respect as I too am just another talking head but a talking head that consults with actual chemists, not just posting my opinion. From my first test I'm very impressed. If I get as many cars as I'm expecting from one bottle and the product lasts anywhere near what 303 say it does then I think it probably falls in to the "must have" category. Graphene Nano Spray Coating™ can be applied to paint, glass, trim, chrome, wheels, and even vinyl wraps. This product is not recommended to be used on tires, although it won’t damage them, it is recommended to wipe up any overspray that occurs on tires. IS 303® GRAPHENE NANO SPRAY COATING™ MADE WITH PURE GRAPHENE, OR GRAPHENE OXIDE? I strongly recommend you send your chemists to one of my classes. I guarantee you - no matter how much they know or think they know - they will have a GREAT learning experience. I always tell my students to get a good nights sleep the night before the first day of class because my classes are all on-your-feet, hands-on learning. There ain't no time for sitting around in chairs. Everyone knows about coatings now days and yes, this is NOT a conventional ceramic type coating that comes in a tiny glass vial, which must be painstakingly applied only after hours of meticulous paint correction, polishing and prep work.

The structure of graphene is a hexagonal lattice of carbon atoms. It is approximately 200 times stronger than steel and harder than a diamond of the same dimensions. It is lightweight, weighing 0.77mg per square metre, and is stretchable with a high tensile strength; graphene can stretch by up to 20 per cent of its original size without breaking. Here's me continuing to apply the product to the car - misting a little onto the pad... I always like to get a picture of myself doing the work because Lord knows - the work doesn't do itself. When protecting your paint there are various waxes, sealants and coatings that all work to a certain extent, but the options can be overwhelming. Some are challenging to apply and protect for years, others are easy to apply and protect for weeks or months, but what if you are looking for something that has the best of both worlds? You don’t have to be a pro detailer to reap the benefits of 303 Graphene Nano Spray Coating. The product is engineered with simplicity in mind so everyday car-lovers can experience superior durability. By lowering the surface temperature of treated areas, water has more difficulty drying on the surface. This process causes hard water spots to become embedded in the clear coat. The product’s versatility allows it to be applied to a vehicle’s paint, glass, wheels, and plastic trim. The coating is safe to apply on all of these surfaces, providing up to one full year of protection following treatment. Using a graphene oxideOpens a new window formula, the agent creates a strong bond with exterior surfaces for an unprecedented level of protection. The product can also be applied in direct sunlight. Applying it in direct sunlight can even make the application process easier, as the heat helps the product cure faster.

This spray coating has substantial hydrophobic properties that stop water dwelling on your paint, plus it reduces the amount of water spots by reducing the surface temperature. As I type this review, Monday December 7th, 2020, last week Yancy and I were in the garage filming new segments showcasing products for My Classic Car with Dennis Gage on MotorTrend channel. The theme for My Classic Car is cool cars like classics, muscle cars, unique cars, etc. So when filming these segments we try to use cars that work to showcase the products but also fit the theme of My Classic Car. To prolong the effectiveness of 303® Graphene Nano Spray Coating™, we recommend to only use regular Car Wash soap, or Wash and Wax products when washing your vehicle after applying the product. Do not use any decontamination wash products, to avoid possible removal of the coating. ARE TOWELS RUINED AFTER USING THEM WITH 303® GRAPHENE NANO SPRAY COATING™? I took a few pictures to show what the car looks like as I worked my way around the car applying the product to all the various body panels. What I like about this type of coating is it leaves a very visible, opaque looking film on the paint surface. While the above video does an excellent job of providing answers to the most frequently asked questions about 303 Graphene Nano Spray Coating, you may still have inquiries such as the following.