For further help and advice, product recommendations, and information about Permabond’s adhesives for electronic components, please feel free to contact Permabond and we will arrange for our chemists to assist you further. An unfilled epoxy with independent heat-curing (50 minutes at 80°C) and light-curing (4 seconds at 150 mW/cm2) mechanisms.

Due to its high levels of versatility, copper foil can easily be adapted and shaped to suit a variety of patterns and designs. LOCTITE® Bergquist® thermally conductive adhesives offer a wide range of applications thanks to their diverse material design. In the case of solder, excessive solder can be moved back to the landing point when heated because of the surface tension of the solder.

Our portfolio includes modified epoxy or silicon-based alternatives to counter high CTE mismatch, flexible substrates, or gasketing. Safety is essential so always make sure you are fully prepared for the task before using soldering equipment.

Alternatives include the use of washi tape or simply using masking tape to enable precise, accurate lines between different colours or shades of paint on a wall. There are numerous different circuit designs you can use for activities like this, but copper tape makes a great addition and is ideal for conducting low levels of electricity around the circuit.Whether tapes, liquids or films, every product has its own specification across a range of features, including color, thickness, and thermal conductivity. What are conductivity, resistivity, and dielectric strength, how are they tested, and what do the measurements mean?

Especially because ECAs don’t require the cleaning of fluxes and flux residues like solder pastes do. The choice of adhesive type is usually dictated by the way the die has been designed, especially regarding electrical conductivity. However, Henkel also offers ECAs that are non-noble metal compatible which are ideal for handheld consumer devices. Because results are affected by the adhesive thickness and the temperature at which the testing is done. Used to bond aerospace, automotive, medical, and telecoms electronic assemblies, they offer a high-performance alternative to solder.Choose between tapes, films and liquid glues to effectively bond materials and provide heat dissipation with one simple product. Manufacturers can choose from a range of resin bases, and cure temperatures to find the product that is suitable for the application. Certain temperature-sensitive electronic components cannot be soldered because the intense heat of liquid solder and the soldering iron can cause damage to the component. Paper circuits are low-voltage electrical circuits that can easily be created using a selection of common materials. Conductivity can further be improved through the size and geometry of the conductive particles that are used to fill the adhesive.