This flexibility removes the need for any ladders, scaffolding or other safety equipment associated with working at height. As well as saving huge amounts of time and pricey equipment hire costs, this presents obvious Health & Safety advantages. An installer can stay safely inside the property, core drill the wall, slip a FlueSnug through the hole and fit the flue. No other materials have to be used to seal the hole around the flue other than the FlueSnug itself.

In response to Part L Building Regulations, all service penetrations now need pipe grommets or collars to keep air tightness around pipes in walls. Fitted in seconds, PipeSnug is the only pipe seal that provides an all-in-one solution which meets Part L’s requirement to seal around pipework inside and outside a building, without the need for sealant, mortar or expensive air sealing tape. It took about 12 to 18 months for Pipesnug to be launched, during which time there were frequent changes made so that the product met the required quality standard. You can also fit PipeSnugs inside too as they kill the draught and look smarter than alternative means of stopping a draught, like stuffing mineral wool or insulation into a cavity.Sealing around a boiler flue traditionally requires pointing with sand and cement. Removing any need for pointing, FlueSnug can be installed in less than five seconds and snuggly fits the 152mm core-drilled hole in the wall through which the boiler pipe and flue exits. FlueSnug can be used both inside and outside the property for the best finish and prevents heat escaping and acts as a barrier to drafts, damp, insects and pests. PipeSnug simply fits into the hole drilled for the pipework and comes in 32mm, 40mm or 110mm sizes, removing any need for pointing. Its big brother, FlueSnug, is endorsed by Worcester Bosch, Ideal Heating and other leading boiler manufacturers and can be installed in less than five seconds. It snuggly fits the 152mm core-drilled hole in the wall through which the boiler pipe and flue exits. Your plumber or builder should install your PipeSnugs, especially if the pipework is exiting your house outside at height or you need help drilling the wall to clear out the old mortar and sealant. A Pipesnug keeps draughts at bay The move to Talon is the right one for PipeSnug – Talon will help accelerate the “‘Snug” family of products’ growth through increased distribution, next day delivery, more product development and even more marketing support. PipeSnug and FlueSnug prevent heat escaping, act as a barrier to drafts, damp, insects and pests and give a great, neat finish as they can be used both inside and outside the property,” continues Alex.

PipeSnug is the only pipe seal that provides an all-in-one solution that meets Part L’s requirement to seal around pipework inside and outside a building, without the need for sealant, mortar or expensive air sealing tape. A draught behind a toilet can be very annoying. The good news is that they are avoidable and can be fixed relatively easily. Some people may be confused as to how a draught gets in as their pipework may be tiled or boxed in, yet they still feel a draught in their bathroom or toilet. Where is the draught coming from? The boiler sealing flue collar, Fluesnug, similarly fits the same size core-drilled hole in the wall as PipeSnug, and it also takes care of any pointing concerns. Soil pipe Building Regulations state that the soil pipe is always placed above the highest water inlet into the pipe and that the opening of ventilating pipes should be at least 900mm above any window in a dwelling that is within three meters of the pipe. How do PipeSnug seal pipes in walls? We want to thank every single one of our great customers, suppliers and supporters along the way – there are so many people who have made this adventure possible.

Chris Burdet and Alex Lever talked about how the product was created and how it has evolved over time in an interview with PHPI. Here is a snapshot of some of the topics that were discussed in the interview. FlueSnug can be used both inside and outside the property for the best finish and prevents heat escaping and acts as a barrier to drafts, damp, insects and pests. FlueSnug is designed primarily to help ensure properties meet air tightness requirements, simplify the installation of flues in older properties and when fitted, eliminates the need for any further pointing with mortar or sealing around the flue to the building fabric. In this time we were refining the design, testing prototypes and finding the right suppliers to work with. One of the major hurdles was to get the product patented, which is a long process,” explains Alex. The use of pipe collars is being recommended for any type of installation to existing dwellings too, so extensions and loft conversions could also benefit from the use of PipeSnug and FlueSnug for compliance with Building Regulations for pipes in walls. The collars can be used both inside and outside the property for the best finish, they prevent heat loss and act as a barrier to drafts, damp, insects and pests.

As well as new builds, the use of pipe collars are being recommended for extensions to existing dwellings too, so extensions and loft conversions could also benefit from the use of PipeSnug and FlueSnug. The collars can be used both inside and outside the property for the best finish and prevents heat loss and acts as a barrier to drafts, damp, insects and pests.” We have other products we are working on, all of which are focused on solving problems in the construction and plumbing sector,” adds Chris. I realised a simple fitting would save so much time in mixing mortar or siliconing around the pipe, as well as blending into the fabric of the building visually,” said Chris. The market for pipe seals will continue to grow as PipeSnug is the only one that provides an all-in-one solution that meets these criteria.

PipeSnug welcomes Part L changes New Approved Document specifies the use of pipe collars and grommets PipeSnug simply fits into the hole drilled for the pipework and comes in 32mm, 40mm or 110mm sizes, removing any need for pointing. Its big brother, FlueSnug, can be installed in less than five seconds and snuggly fits the 152mm core-drilled hole in the wall through which the boiler pipe and flue exits. The product can be used both inside and outside the property for the best finish and prevents heat escaping and acts as a barrier to drafts, damp, insects and pests. The recent changes to Part L Building Regulations and consultations on the Future Homes Standard and the Future Buildings Standard are all part of the Government’s drive to make new homes Net Zero Carbon by 2025, and lower the carbon emissions from existing housing. You can read more about the Government’s move to Net Zero Carbon here. PipeSnug and FlueSnug are ideal to help new builds and existing dwellings meet the requirements of Building Regulations for pipes in walls set out in these regulations and consultations. Soil pipes building regulations