Not home? The Touch Screen Control Centre can also be controlled remotely through the Smart Life App, so no matter where you are, you will always have full control over your infrared heating. Little miracle of heating. Sits under my computer desk and gently and fairly quietly blows some heat around me sitting pretty close by. Actually if you put your hand down in front of it you can really feel the heat so it makes me laugh it's that amazing or something. Not sure about the thermostat though. It does work but there seems a wide temp range between it switching on/ff so not so accurate but basically it mostly stays always on in any case. USB supply is 10w so handy and useful. The PIR sensor must be used in conjunction with a Herschel Thermostat, it will not control your heating just on its own. The Touch Screen Control Centre is wired directly to the mains circuit, and must be installed within range of a 2.4Ghz WiFi network. The Touch Screen Control Centre is designed to operate with Smart Life Scenes, so no wiring directly to the panel or thermostats is required.

The Herschel iQ MD2 Wired Thermostat is ideal for new builds / renovations where cabling can be neatly hidden whether it be for domestic or commercial applications. When used in conjunction with your wifi network and the SmartLife app, MD2 can also be controlled remotely via the internet, enabling you to manage your heating when you are away from the building. The award-winning design of the Herschel iQ MKW Mains Powered WiFi Thermostat is ideal for new builds / renovations where cabling can be neatly hidden whether it be for domestic or commercial applications and can control temperatures of up to 45°C. When used in conjunction with your WiFi network and the SmartLife App, MKW can run in fully programmable ‘Smart Mode’ enabling you to manage your heating as efficiently as possible whether you are home or away.

Inspire panels are designed for professional installation only and do not have any inbuilt receivers. They must be controlled with our Herschel IQ controllers and there are a number of options (sold separately) to choose between. The panels are directly wired either to our MD2 hard wired thermostat. MKS, MKW or to our R2 receiver. Full App control is available when used with all options. Select your thermostat options below. The R2 Receiver must be wired to the mains electricity supply and also to the Herschel heater(s). The T2 and R2 are paired wirelessly to each other and the R2 can also be paired to your wifi for SmartLife app control (if required). Pundmann water heaters provide hot water on the go. The options for power are flexible and are offered in a range of combinations , including a hot air heat exchanger from an additional diesel heater, and 12v or 230v heating elements. We recommend you install a thermostatically controlled mixer tap to dispense your water at a safe 40°- 45°C allowing even a modest tank of warmed water to go a long way. Water can be heating up whilst your underway and with the benefits of solar or wind charging of your 12v battery warm water can keep on flowing. If using the MKW with the Select XLS panel range the SMART-R function of the XLS panel will be bypassed. The thermostat will have to be hard-wired directly to the heater as well as the mains. (It is not possible to pair wirelessly with the panel).

Note: Herschel iQ controls will only work with Herschel heaters. T he MD2 thermostat is not compatible with Remote models.The Ultra iQ Range (S-TSCC, S-FSC, S-HSS, and PIR001) are Energy-Saving Accessories and must be used in conjunction with thermostats. These are not thermostats. A T2 must be used even if SmartLife app control is to be the primary means of controlling your heating (i.e. you cannot use just the App and R2). The PIR Sensor works with Herschel Wifi-enabled thermostats to give you extra energy savings on your heating based on room occupancy when the heating is on. (Why have the heating on full blast in a room noone is in?).

Easy to install it is perfect for installations where hard wiring to the MD2 Thermostat would be impractical (for example, if you wish to minimise chasing out walls/cable trunking).MD2 is wired directly to the mains circuit and to the heaters and requires recessing into the wall. Not home? The Four Scene Control can also be controlled remotely through the Smart Life App, so no matter where you are, you will always have full control over your infrared heating. With its award-winning designer finish and smart, flexible control via the SmartLife App, the Herschel iQ MKS Mains powered WiFi Thermostat provides the ideal choice for control of your infrared heating system. Perfect for new builds and renovations where cabling can be neatly hidden whether it be for domestic or commercial applications and can control temperatures of up to 45°C. When used in conjunction with your WiFi network and the SmartLife App, MKS can run in fully programmable ‘Smart Mode’ enabling you to manage your heating as efficiently as possible whether you are home or away. If using the MKS with the Select XLS panel range the SMART-R function of the XLS panel will be bypassed. The thermostat will have to be hard-wired directly to the heater as well as the mains. (It is not possible to pair wirelessly with the panel). Pundmann water heaters are designed for off road, on the road and off shore adventure. Perfect for boats, campervans, motorhomes , caravans, mountain top cabins, sandy shored beach huts, long distance lorry drivers, even the shed at the end of your garden.