Mastic guns are prone to mix separation and clogging, especially with self-mixes - not a problem with the auger-fed Quikpoint. To maintain the integrity and weatherproofing of a structure, it is important that mortar joints are of sufficient depth, have no hidden voids and are adequately compressed and sealed. The Quikpoint Mortar Pointing Gun is a convenient and effective joint filling system, used by Masonry and Pointing Contractors yet suitable for less skilled operatives and competent DIYers. The Quikpoint Pointing Gun is consistently faster than trowel filling and more likely to achieve full joint penetration. It is physically less demanding than hand-held pointing guns (also known as caulking or mastic guns) which rely on hand-generated pressure and hence are prone to causing Repetitive Strain Injuries (RSI). Quikpoint Advantages - to maintain the integrity and weatherproofing of a structure, it is important that mortar joints are of sufficient depth, have no hidden voids and are adequately compressed and sealed. The Quikpoint Mortar Pointing Gun is a convenient and effective joint filling system, used by Masonry and Pointing Contractors yet suitable for less skilled operatives and competent DIYers. The Quikpoint Pointing Gun is consistently faster than trowel filling and more likely to achieve full joint penetration. It is physically less demanding than hand-held pointing guns (also known as caulking or mastic guns) which rely on hand-generated pressure and hence are prone to causing Repetitive Strain Injuries (RSI). Battery drills - a corded mains drill will always deliver better performance but there are numerous instances of battery drills being attached to Quikpoints. Handy for restricted or challenging jobs such as repointing chimneys. Specially designed nozzle with 4 interchangeable steel tips (small: 3/16" X 0.8", medium: 1/4" X 0.8", large: 0.55" X 0.66", and special angled tip for overhead work 1/4" x 0.8"). Nozzle rotates for horizontal and vertical joints.

Quikpoint TURBO Pointing attachment on a Makita DHP458Z 18 volt Cordless drill (see below regarding Batteries and Charger) Makita DHP458Z drill accessories - Side handle; Depth stop bar; Belt clip (loose); screwdriver bits x 2 (loose)Easily mounted to all 3/8 inch variable speed drills, corded or uncorded. Comes with a heavy duty super durable bag.

The QUIKPOINT DRILL-MATE MORTAR GUN is easily mounted to all 3/8 inch variable speed drills, corded or un-corded. With its auger drive and hardened steel tip-blades (to prevent plugging and vibrator feed), the DRILL_MATE can handle standard and pre-mixed mortars and makes anyone an expert pointer. The Quikpoint is a definite time and money saver. Just scoop mortar in to the 3 quart capacity hopper, pull the trigger on the drill and a continuous controlled bead of mortar can be applied up to 5 times faster than conventional pointing methods, to any masonry application.

Simplified design

Enhanced Stability and Speed: With a specially designed labor-saving bearing at the rear end, this grout gun ensures exceptional stability during operation. The bearing design not only enhances stability but also boosts discharge speed, allowing for smooth and continuous grouting without interruptions. The smaller the better - avoid heavy duty drills, such as hammer or SDS types. A slim-body rotary drill should weigh less than 2 kg. About Quikpoint TURBO - the significant change when compared to the previous PLUS specification is the new TURBO auger, manufactured in steel and hardened after assembly. It features a reducing diameter spiral which now extends into the delivery nozzle. Field tests have shown improved mortar delivery rate along with the ability to process stiffer and more gritty mixes. vdw 850 is a particularly high performance and extremely durable, self compacting, epoxy bound paving jointing mortar for pedestrian, light and medium vehicular traffic loads, including larger vehicles and mechanical road sweepers, pressure water jetting etc, etc. A few seconds with the Quikpoint scoop vs unscrewing and withdrawing plunger, filling narrow tube, refitting plunger etc.